KNOT-TEC Knot Filling & Wood Repair
What is KNOT-TEC? It’s hard to believe that there is a wood repair system that is both...Read More
LIMITED TIME OFFER: FREE GLUE GUN PAD WITH ALL INFINITY BOND GLUE GUNS SHOP NOW
The Infinity PUR WW60 is a wood to wood polyurethane hot melt (PUR) adhesive. This cartridge is an exact replacement of the Titebond WW60 PUR and is dispensed using the same cartridge gun.
PUR WW60 is an excellent adhesive for product assembly and manufacturing applications. It offers bonds strong enough to often replace screws, fasteners, nails, staples and other non-adhesive fastening mechanisms. The PUR WW60 is also dispensed with an all-electric applicator that is lightweight, cordless and very portable giving tremendous freedom in assembly applications.
Whats the Same
Both traditional hot melt and polyurethane (PUR) hot melt typically need to be heated to be applied. They are both non-toxic and generally one of the safer adhesives for bonding and sealing.
PUR WW60 offers a longer open time than most hot melts (60 seconds) and has a strong bond that continues to strengthen over time as it reacts with moisture in the air. Traditional hot melt adhesives do not continue to strengthen after they have fully set. PUR WW60 requires a cartridge gun for dispensing and should not be exposed to air before being used. The shelf life is up to 2 years where traditional hot melts don't really have a shelf life.
used the glue to get full length strips for a strip built boat. the glue out performed my expiations.
i bought it for putting casing sets together, having problems with consistent bonds, one will hold then the next one breaks when you take the clamp off. Sure it's just a learning curve.
Thanks for the purchase and the review. We get questions a lot for best practices with PUR WW30, WW60 and MP75. Please note, the strength after 5-10 minutes is similar to a traditional hot melt. The beauty of WW60 PUR is that it will continue to strengthen over the next 12-24 hours as it reacts with moisture in the air. During this time, chemical adhesion occurs giving it a bond as strong as many structural adhesives which allows people to use WW60 in lieu of screws, nails or other fasteners. So, for best results, please give up to 24 hours for full strength, even though working strength is reached in a matter of minutes. Hope this helps! The Hotmelt.com Team
used this product to assemble crown on upper cabinets where no other access was available
Fantastic glue, instant success , no mess
Worked perfectly for starting and ending strips of hardwood flooring.