Table of Contents
- Infinity Bond EasyMelt Product Overview
- How the EasyMelt Benchtop System Works
- Pros
- Cons and Limitations
- Ideal Use Cases
- Our Review
- When to Choose the EasyMelt
- FAQs
Your hot melt dispensing process can directly impact your production. While glue sticks and glue guns can often get the job done, they may be slowing down your production process. If you are looking to bump up to a bulk hot melt system, the Infinity Bond EasyMelt benchtop hot melt tank is often the next step, but is it the right choice for your needs?
Our team has worked with a wide range of hot melt dispensing systems. In this article, we take a close look and review the Infinity Bond EasyMelt benchtop hot melt tank. We break down how it works, its pros, cons, and ideal use cases to help you make an informed decision.
Infinity Bond EasyMelt Product Overview
The Infinity Bond EasyMelt system is a benchtop hot melt tank with a foot pedal. It is compatible with numerous bulk hot melt adhesive formulations. The hot melt is loaded into a heated tank, and compressed air pushes the melted adhesive through a hose and nozzle onto the substrate. When the foot pedal is pushed, the system uses a built-in shot timer to dispense a metered shot and ensure accurate and repeatable dispensing.
With its compact design and ease of use, it is often considered the next step up from manual application with handheld glue guns and is ideal for medium- to low-volume production. Compared to hot melt glue guns, it can reduce operator fatigue as well as speed up production, but at the same time, it is not as costly or complex as fully automated or larger hot melt systems.
Key Features and Capabilities
The EasyMelt hot melt equipment includes several key features that can appeal to manufacturers, including:
- Built-in shot timer for repeatable adhesive output
- Adjustable temperature range up to approximately 430°F
- Manual and automatic shot-timed dispensing capabilities
- Pneumatic dispensing system
- Foot pedal operation for hands-free control
- Interchangeable nozzles for bead or dot application
- Compact benchtop footprint for easy integration into workstations
Technical Details
| Property | EasyMelt Benchtop Tank |
| Tank Capacity | ~1 liter |
| Melt Rate | ~6 lbs/hour |
| Temperature Range | 120°F to 430°F |
| Power | 120V |
| Wattage | 800W |
| Max Viscosity | Up to ~20,000 cps |
| Dispensing Type | Bead and dot |
How the EasyMelt Benchtop System with Pedal Works
Before we dive into the ideal use cases for the EasyMelt hot melt tank, it can be helpful to understand how it works and how to operate the EasyMelt system. Like many other hot melt systems, the EasyMelt equipment uses a heated reservoir to melt the thermoplastic hot melt adhesive for use. The system relies on compressed air to push the liquid hot melt through the system and dispense it onto the substrate.
What makes this system unique is its foot pedal operation. The foot pedal activates the system, and the built-in shot timer will dispense a metered shot of adhesive onto the substrate.
In simple terms, the Infinity Bond EasyMelt hot melt system works by going through the following steps:
- You load the bulk hot melt adhesive into the tank and secure the tank lid.
- The heating system melts the adhesive to the desired temperature.
- Flip the pneumatic lever from discharge to charge.
- Adjust the settings to meet your dispensing specifications.
- Compressed air pressurizes the tank.
- You use a foot pedal to trigger adhesive flow.
- The shot timer controls output for consistent application.
This setup gives you more control than manual tools while keeping the system simple for operators.
Pros of the EasyMelt System
The EasyMelt glue dispensing system offers several advantages that make it appealing for manufacturers and different applications. Some of the most notable benefits of the EasyMelt hot melt system include:
- Improved repeatability and consistency versus handheld glue guns
- Reduced operator fatigue compared to handheld glue guns
- Easy foot pedal operation
- Compact size for limited workspaces
- Adjustable settings for flexibility across applications
- Cost-effective compared to automated or large-scale hot melt tanks
These benefits are especially important for manufacturers looking to improve efficiency without adding complexity.
Cons and Limitations
While the EasyMelt hot melt glue tank is versatile and great in many scenarios, it is not the right fit for every application. Some potential limitations of the Infinity Bond EasyMelt hot melt system include:
- Manual loading of adhesive required
- Requires an external air compressor
- Not ideal for high-volume production or fully automated production lines
- Factors like air pressure settings and nozzle positioning can still influence consistency
These limitations matter most in high-speed environments where high throughput and automation are involved.
Ideal Use Cases for the Infinity Bond EasyMelt Tank
The EasyMelt benchtop melting system is great for many small- to medium-volume applications. Some of the most common applications for the EasyMelt hot melt adhesive equipment include:
- Packaging and carton sealing for small production runs
- Product assembly using plastics, foam, or wood
- Manual workstations in light manufacturing
- Prototyping and short production cycles
- Specialty applications requiring controlled adhesive output
In these scenarios, the system provides a balance between control, cost, and ease of use. It is particularly effective where production volumes do not justify automated equipment.
Our Review of the EasyMelt Hot Melt System
Our team has been in the adhesives dispensing industry for over 50 years and has worked with different brands, models, and sizes of bulk hot melt dispensing systems. In our opinion, the EasyMelt glue dispensing system is a great choice for businesses looking to increase their throughput from manual application with handheld glue guns but are not in need of large-scale or automated dispensing.
The Infinity Bond EasyMelt dispenser is compact in size and sits comfortably on a benchtop for workstations with limited space. If you have inexperienced operators, the EasyMelt system is simple in design and easy to use. In our experience, managers tend to appreciate this simplicity as it can also reduce maintenance and training requirements compared to other bulk hot melt systems. The foot pedal design can also decrease worker fatigue, and coupled with the shot timer, you still have controlled and repeatable dispensing that can improve your consistency compared to glue gun dispensing.
That being said, the EasyMelt hot melt dispenser does have its limitations. It is not a high-output system, and it is not compatible with high throughput or automated lines. If your operation is growing rapidly and you are looking to scale, you can outgrow the EasyMelt quickly. Instead, you may want to consider a higher volume system from the start. You will also need to ensure that the EasyMelt system is compatible with your adhesive and production environment.
When to Choose the Infinity Bond EasyMelt Hot Melt Equipment
If you are trying to determine whether or not the EasyMelt hot melt glue dispenser is right for your needs, you should consider your product volume, throughput requirements, current level of operator fatigue, consistency needs, available workspace, and budget.
You may want to choose the Infinity Bond EasyMelt hot melt system if...
- You are looking for the next step up in throughput from handheld glue guns
- Operator fatigue is slowing down or negatively impacting your production
- You want improved consistency in your dispensing without automation
- Automated or large hot melt tanks are not necessary for your production and throughput needs
- You are looking for a cost-effective bulk hot melt system that won’t break the bank
- Your operators are less experienced, and you do not want to spend a lot of time on training
Still Not Sure?
While the EasyMelt benchtop hot melt tank is a practical and effective solution for many, that does not mean it is the right system for your needs. If you are unsure if the EasyMelt is right for you or are in need of something else, we want to help.
At Hotmelt.com, we have an extensive selection of bulk hot melt tanks for varying needs and applications. Our team can also provide you with a personalized equipment recommendation to ensure you find the right fit. Contact us today to get connected with an expert.
