Technomelt PA 7460, sometimes referred to as Loctite Hysol SprayPac 7460. This Polyamide hot melt adhesive is formulated to be extruded or applied in spray applications.
The Technomelt 7460 exhibits high heat resistance and a fast set time and is suitable for bonding foams, fabrics, wood and other materials.
Henkel Technomelt PA 7460 adhesive should be sprayed 6-9 inches above the substrate with the best bonding results achieved when the substrates are bonded immediately. Technomelt PA 7460 should be thoroughly dusted with the powder from the carton. Before using a new carton, simply roll the carton to redistribute the powder.
Hotmelt.com provides the widest range of products at the lowest prices. In addition, our adhesive experts can help tailor a solution specific to the needs of your application and budget. Contact Us today for a custom product recommendation or with any questions you may have.
Product Type | Hot Melt Adhesives, Adhesives, Structural Adhesives |
---|---|
Application Method | Spray |
Color | Amber: Light Amber |
Full Cure Temperature | 77 °F |
Key Characteristics | Cure Speed: Fast Cure, Environmentally Responsible Material, Gap Filling, Heat Cure Resistant, Polyamide Based, Shrinkage: Low Shrinkage, Solvent Free, Strength: Green Strength (Sticky), VOC Free |
Number of Components | 1 Part |
Open Time | 30 sec. |
Physical Form | Liquid |
Shear Strength Unit, Steel | psi |
Shear Strength, Steel | 800 |
Substrates | Fabric, Foam, Laminate, Plastic, Wood |
Technology | Hot Melt |
Temperature Resistance | 210 °F |
Viscosity | 375 mPa.s (cP) Brookfield |
Viscosity Temperature | 77 °F |