Our 8 Favorite Hot Melt Glue Gun Kits of 2018
At Hotmelt.com, we sure have seen a lot of hot melt glue gun kits over the years. But ...Read More
OVERSTOCK! Buy Graco InvisiPack at Cost for Limited Time Only Shop Now
The 3M Polygun II Valve Kit (Part # 9223) includes the valve assembly and nozzle tip. We recommend that if you have 2-5 PG II applicators in use it's helpful to have 1 in stock, 6-10 keep 2 in stock, 11-15 3 in stock, 16-20 have 4 in stock. The PG II valve kit is one of the most popular repair kits needed for the 3M PG II glue gun.
3M™ Scotch-Weld™ Hot Melt Applicator PG II must be heated prior to repairing nozzle valve. CAUTION: WEAR SAFETY GOGGLES AND HEAT RESISTANT GLOVES. DISCONNECT AIR LINE BEFORE MAKING REPAIRS. Nozzle valve assembly consists of the nozzle tip and the nozzle valve. Remove the old valve assembly using a 5/8’’ open-end wrench. Replace with new assembly. Gently snug up the valve assembly. With a 1/2’’ wrench, also snug up the new tip.
Our experts know the 3M PG II glue gun and adhesives backwards and forwards. Questions? Contact us about gun repair, adhesive recommendations and more.
Today we want to highlight one of our favorite workhorses in the hot melt category: In...Read More