Graco 24P076 InvisiPac GS35 Dual Hot Melt Applicator with 110 VAC Solenoid and Pt 100 RTD

GS35 24P076 InvisiPac Dual Hot Melt Applicator for End of Line Packaging

Graco’s InvisiPac GS35 dual hot melt applicator (model 24P076) supports reliable constant bead dispensing in high-speed case and carton sealing applications. Built to maintain consistent adhesive flow during continuous operation, the GS35 uses a free-flow manifold and integrated filtering to reduce adhesive char and prevent nozzle plugging. Its dual-module layout allows simultaneous bead application while helping minimize downtime and maintenance demands on packaging lines.

Fast startup and electrical control are central to GS35 performance. The applicator reaches operating temperature in under 10 minutes and operates at speeds up to 3,500 cycles per minute. This model is equipped with a 110 VAC solenoid valve and a Pt 100 RTD for accurate temperature feedback and dependable actuation. The GS35 integrates directly with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50, supporting clean adhesive delivery across end-of-line and industrial packaging equipment.

Looking for another InvisiPac GS35 configuration? View the full GS35 applicator lineup here.

Performance Advantages of the Graco 24P076 InvisiPac GS35 Dual Applicator

• Designed for Continuous Bead Applications: Engineered specifically for constant bead dispensing, delivering stable adhesive output at speeds up to 3,500 cycles per minute for reliable case and carton sealing.
• Dual-Module Adhesive Output: Two applicator modules apply adhesive simultaneously across multiple points, supporting even bead placement and consistent seal quality on high-speed packaging lines.
• Cleaner Adhesive Path, Less Maintenance: A free-flow manifold with integrated applicator and module filtration helps reduce adhesive char and debris buildup, minimizing nozzle plugging and maintenance interruptions.
• Fast Startup Performance: Heats up in under 10 minutes, allowing production lines to reach operating temperature quickly after shutdowns or line changeovers.
• Dependable Electrical Control: Equipped with an air-open, spring-close design and a 110 VAC solenoid valve to provide consistent, repeatable actuation during continuous operation.
• System-Matched for InvisiPac: Purpose-built for use with Graco InvisiPac Tank-Free Hot Melt Delivery Systems (HM10, HM25c, HM50), helping maintain clean adhesive delivery throughout the entire dispensing system.

Technical Specifications

• Series: InvisiPac GS35
• Model: 24P076
• Type: Hot Melt Applicator
• Style: Dual
• Number of Modules: 2
• Mode of Operation: Air Opened, Spring Closed
• Speed: > 3,500 cycles/minute
• Heat-up Time: 10 minutes to 350°F (176°C) at 240 VAC
• Heater: 240 V
• Solenoid Valve Voltage Rating: 110 VAC
• RTD Type: Pt 100 RTD
• Maximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)
• Minimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)
• Maximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)
• Suitable for Wash Down/Waterwash Applications: No
• Approvals and Standards: UL 499 Listed, CSA88, CE, ISO 9001