EPA Approved COVID-19 Bulk Industrial Cleaner and Disinfectant
Fill out the details below and we'll get pricing right over to you.
Your Trusted Source For Hot Melt Adhesives & Equipment
The EPA Approved COVID-19 Bulk Industrial Cleaner and Disinfectant is a water based, bleach free, biocide and virucide disinfectant that is ready to use. Dispense the industrial cleaner in any sprayable dispenser and spray on any surface; walls, counters, machinery, shopping carts, handles, door knobs, etc. and the material will disinfect as designed. This disinfectant has been approved as a disinfectant against COVID-19 and is registered with the EPA.
Use the COVID-19 Bulk Industrial Cleaner and Disinfectant can be used to wipe down machinery, doors, handles, etc and does not need to be wiped off once applied - just let it dry. One gallon should clean approximately 1000 square feet.
What is the shelf life of the COVID-19 Bulk Industrial Cleaner and Disinfectant?
12 months would be standard shelf life.
Can I fog it? Where I heat is up and spray a fine mist?
Fogging is not a use included on our label. It is coarse spray only. Sprayers like trigger sprayers, pump-up garden sprayers or low-pressure airless spray can be used but can't suggest fogging or misting type sprayers.
Can this product be used for food contact surfaces in food production facilities?
This product is NOT for food contact surfaces in food production facilities. We do not have any FDA approvals for this product. Do not use for sanitizing food production equipment. As stated on the label "Before use in a federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected." Therefore, this product would not be appropriate for food production areas, but other areas in the plant where food is not present or can be isolated it may be possible. See label instructions.
Can this product be used for food tact surfaces in non-food production facilities?
As stated on the product label, this product may be used on washable hard, non-porous surfaces such as tables, floors, walls, countertops. It may be used in hospitals, homes, institutional locations such as restaurants, hotels, health clubs and spas etc. If used on food prep surfaces the label directions require rinsing of all surfaces that come in contact with food such as countertops, appliances, tables, stovetops with potable water before reuse. Please see attached copy of our label with the relevant food processing statements highlighted. NOTE: the product should not be used on utensils, glassware or dishes.
Is it safe for food contact?
This product is not recommended, nor FDA approved for food contact surfaces.
What does it mean some potential Volatility with Water? Can you elaborate more on that?
"Water" is not 100% pure. It can contain impurities that will react with our active ingredient. In our plant we use de-ionized water to get the active to the right concentrate to be ready to use. This gives us confidence that the active level will be right on when end customers use the product. In other words, some impurities common in water can react with these active ingredients.
Questions about this product? Our team of adhesive specialists can help. Submit your questions and we'll get you answers right away.