{"title":"Graco InvisiPac GS35 Low-Profile Quad Hot Melt Applicators","description":"","products":[{"product_id":"graco-24u033-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U033 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with 24 VDC Solenoid and Pt 100 RTD","description":"\u003ch2\u003eInvisiPac GS35 Low Profile Quad Adhesive Applicator for High-Speed Packaging Lines\u003c\/h2\u003e\u003cp\u003eBuilt for high-speed packaging lines where vertical clearance is limited and multi-point constant bead application is required, the Graco 24U033 InvisiPac GS35 low-profile quad hot melt applicator delivers consistent adhesive output across four dispense locations. The low-profile quad configuration allows integration into space-constrained case and carton sealing equipment while maintaining uniform bead formation across multiple application points. Its plug-free adhesive path helps prevent nozzle plugging and reduce adhesive char, supporting cleaner operation and improved uptime in continuous industrial packaging environments.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 supports clean, stable adhesive delivery throughout the dispensing system. This configuration features a 24 VDC solenoid valve for responsive electronic control and a Pt 100 RTD for accurate temperature monitoring during operation. With a heat-up time of under 10 minutes, air-opened, spring-closed operation, and cycle speeds exceeding 3,500 cycles per minute, the 24U033 is well suited for low-clearance packaging lines that require reliable four-point constant bead dispensing.\u003c\/p\u003e\n\u003cp\u003eThis model is part of the InvisiPac GS35 applicator series. \u003ca href=\"\/collections\/graco-gs35-hot-melt-applicators\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" rel=\"noopener\" target=\"_blank\"\u003eView all available GS35 configurations here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features and Benefits of the InvisiPac GS35 24U033 Dispense Valves\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 VDC Solenoid Control:\u003c\/strong\u003e Provides fast, reliable valve actuation for high-speed packaging and precise bead start-and-stop control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePt 100 RTD Temperature Feedback:\u003c\/strong\u003e Delivers accurate temperature monitoring to help maintain consistent adhesive performance during production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Application:\u003c\/strong\u003e Applies adhesive at four locations simultaneously for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Design:\u003c\/strong\u003e Four dispense modules in a reduced-height body allow installation in packaging equipment where vertical space is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal design helps reduce adhesive buildup and nozzle plugging, supporting cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Operation:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35 \u003c\/li\u003e\n\u003cli\u003eModel: 24U033\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: 24 VDC\u003c\/li\u003e\n\u003cli\u003eRTD Type: Pt 100 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ 24 VDC \/ Pt 100","offer_id":47723433558233,"sku":"GRACO 24U033","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u033-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941413"},{"product_id":"graco-24u034-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U034 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with 110 VAC Solenoid and Pt 100 RTD","description":"\u003ch2\u003eLow-Profile Quad GS35 Applicator for Graco InvisiPac Systems\u003c\/h2\u003e\u003cp\u003eThe Graco 24U034 InvisiPac GS35 low-profile quad hot melt applicator is designed for constant bead adhesive dispensing in high-speed case and carton sealing operations where vertical space is limited. The low-profile quad configuration supports uniform adhesive output across four dispense points while maintaining a compact height for integration into space-constrained packaging equipment. Built with a plug-free adhesive path, the GS35 helps reduce nozzle plugging and adhesive char, supporting cleaner operation and improved uptime in continuous industrial packaging environments.\u003c\/p\u003e\n\n\u003cp\u003eWhen used with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 delivers clean, stable adhesive flow across the entire dispensing system. This configuration features a 110 VAC solenoid valve for dependable electrical actuation and a Pt 100 RTD for accurate temperature monitoring during operation. Reaching operating temperature in under 10 minutes and operating in an air-opened, spring-closed mode at cycle speeds exceeding 3,500 cycles per minute, the 24U034 functions as a reliable adhesive dispenser and dispense valve solution for packaging line equipment, manufacturing adhesive systems, and high-speed box and carton sealing applications.\u003c\/p\u003e\n\u003cp\u003eLooking for another InvisiPac GS35 configuration? \u003ca rel=\"noopener\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" href=\"\/collections\/graco-gs35-hot-melt-applicators\" target=\"_blank\"\u003eView the full GS35 applicator lineup here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eLow-Profile Design Advantages of the Graco 24U034\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Configuration:\u003c\/strong\u003e Four dispense modules in a reduced-height design allow installation in packaging equipment with limited vertical clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Dispensing:\u003c\/strong\u003e Applies adhesive at four locations at once for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 VAC Control with Pt 100 RTD Feedback:\u003c\/strong\u003e Uses a 110 VAC solenoid for reliable valve actuation while the Pt 100 RTD provides accurate temperature feedback to help maintain stable adhesive flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal design helps reduce adhesive buildup and nozzle plugging, supporting cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Capability:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Air-Opened, Spring-Closed Operation:\u003c\/strong\u003e Provides consistent valve performance at high speeds for reliable constant bead dispensing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35 \u003c\/li\u003e\n\u003cli\u003eModel: 24U034\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: 110 VAC\u003c\/li\u003e\n\u003cli\u003eRTD Type: Pt 100 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ 110 VAC \/ Pt 100","offer_id":47723433591001,"sku":"GRACO 24U034","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u034-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941431"},{"product_id":"graco-24u035-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U035 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with No Solenoid and Pt 100 RTD","description":"\u003ch2\u003eOverview of Graco GS35 Low-Profile Quad Applicator for High-Speed Packaging\u003c\/h2\u003e\n\u003cp\u003eConfigured in a low-profile quad-module layout, the Graco 24U035 InvisiPac GS35 hot melt applicator is designed for constant bead adhesive dispensing in high-speed case and carton sealing operations where vertical clearance is limited. The four-module, low-profile configuration allows uniform adhesive output across multiple dispense points while fitting into space-constrained packaging equipment. Built with a plug-free adhesive path, the GS35 helps prevent nozzle plugging and reduce adhesive char, supporting cleaner operation and minimizing maintenance in continuous production environments.\u003c\/p\u003e\n\u003cp\u003eThis configuration operates without an onboard solenoid and incorporates a Pt 100 RTD for accurate temperature monitoring under system-controlled operation. Reaching operating temperature in under 10 minutes and operating in an air-opened, spring-closed mode at cycle speeds exceeding 3,500 cycles per minute, the 24U035 is well suited for low-clearance packaging lines that require reliable four-point constant bead dispensing. When integrated with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 delivers clean, stable adhesive flow across the entire dispensing system.\u003c\/p\u003e\n\u003cp\u003eSee additional \u003ca rel=\"noopener\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" href=\"\/collections\/graco-gs35-hot-melt-applicators\" target=\"_blank\"\u003eGraco InvisiPac GS35 applicator configurations.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the Graco 24U035 GS35 Low-Profile Quad Applicator\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Dispensing:\u003c\/strong\u003e Applies adhesive at four locations simultaneously for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Applicator:\u003c\/strong\u003e Four dispense modules in a reduced-height design allow installation in packaging equipment with limited vertical clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Solenoid, System-Controlled Operation with Pt 100 RTD:\u003c\/strong\u003e Designed for externally controlled systems, using a Pt 100 RTD to provide accurate temperature feedback without an onboard solenoid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal flow design helps reduce adhesive buildup and nozzle plugging to support cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Performance:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for InvisiPac Tank-Free Systems:\u003c\/strong\u003e Intended for use with Graco InvisiPac hot melt delivery systems to support clean adhesive delivery and reduced maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eModel Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35\u003c\/li\u003e\n\u003cli\u003eModel: 24U035\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: None\u003c\/li\u003e\n\u003cli\u003eRTD Type: Pt 100 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ No Solenoid \/ Pt 100","offer_id":47723433623769,"sku":"GRACO 24U035","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u033-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941413"},{"product_id":"graco-24u036-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U036 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with 24 VDC Solenoid and Ni 120 RTD","description":"\u003ch2\u003eGS35 Low-Profile Quad Applicator for Graco InvisiPac Hot Melt System\u003c\/h2\u003e\n\u003cp\u003eDesigned for high-speed packaging lines where vertical clearance is limited and four-point constant bead application is required, the Graco 24U036 InvisiPac GS35 low-profile quad hot melt applicator delivers consistent adhesive output across multiple dispense locations in case and carton sealing operations. The low-profile quad configuration allows integration into space-constrained packaging equipment while maintaining uniform bead formation across all four modules. Its plug-free adhesive path helps minimize nozzle plugging and adhesive char, supporting cleaner operation and reducing maintenance interruptions in continuous industrial packaging environments.\u003c\/p\u003e\n\u003cp\u003eThis configuration features a 24 VDC solenoid valve for responsive electronic control and a Ni 120 RTD to support accurate temperature monitoring during operation. Reaching operating temperature in under 10 minutes and operating in an air-opened, spring-closed mode at cycle speeds exceeding 3,500 cycles per minute, the 24U036 is well suited for low-clearance box sealing and packaging automation systems that require reliable four-point constant bead dispensing. When integrated with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 delivers clean, stable adhesive flow across the entire dispensing system.\u003c\/p\u003e\n\u003cp\u003eSee additional \u003ca rel=\"noopener\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" href=\"\/collections\/graco-gs35-hot-melt-applicators\" target=\"_blank\"\u003eGraco InvisiPac GS35 applicator configurations.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eGraco InvisiPac GS35 24U036 Performance Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Dispensing:\u003c\/strong\u003e Applies adhesive at four locations at the same time for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Configuration:\u003c\/strong\u003e Four dispense modules in a reduced-height design allow installation in packaging equipment with limited vertical clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 VDC Solenoid with Ni 120 RTD Feedback:\u003c\/strong\u003e Uses a 24 VDC solenoid for reliable valve actuation while the Ni 120 RTD provides accurate temperature feedback during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal adhesive flow design helps reduce buildup and nozzle plugging to support cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Operation:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for InvisiPac Tank-Free Systems:\u003c\/strong\u003e Built for use with Graco InvisiPac hot melt delivery systems to support clean adhesive delivery and reduced maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplicator Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35\u003c\/li\u003e\n\u003cli\u003eModel: 24U036\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: 24 VDC\u003c\/li\u003e\n\u003cli\u003eRTD Type: Ni 120 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ 24 VDC \/ Ni 120","offer_id":47723433689305,"sku":"GRACO 24U036","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u033-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941413"},{"product_id":"graco-24u037-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U037 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with 110 VAC Solenoid and Ni 120 RTD","description":"\u003ch2\u003eLow-Profile GS35 Applicator with Four Modules for Graco InvisiPac Systems\u003c\/h2\u003e\n\u003cp\u003eThe Graco 24U037 InvisiPac GS35 low-profile quad hot melt applicator delivers consistent adhesive output across multiple dispense locations in case and carton sealing environments. The low-profile quad configuration allows integration into space-constrained packaging equipment while maintaining uniform bead formation across all four modules. Its plug-free adhesive path helps minimize nozzle plugging and adhesive char, supporting cleaner operation and improved uptime in continuous industrial packaging applications.\u003c\/p\u003e\n\u003cp\u003eThis configuration is equipped with a 110 VAC solenoid valve for dependable electrical actuation and a Ni 120 RTD to provide accurate temperature monitoring during operation. Reaching operating temperature in under 10 minutes and operating in an air-opened, spring-closed mode at cycle speeds exceeding 3,500 cycles per minute, the 24U037 functions as a reliable adhesive dispenser and dispense valve solution for packaging automation, industrial packaging equipment, and high-speed box and carton sealing applications. When integrated with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 provides clean, stable adhesive delivery throughout the dispensing system.\u003c\/p\u003e\n\u003cp\u003eThis model is part of the InvisiPac GS35 applicator series. \u003ca href=\"\/collections\/graco-gs35-hot-melt-applicators\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" rel=\"noopener\" target=\"_blank\"\u003eView all available GS35 configurations here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuad-Module Adhesive Application Benefits of the InvisiPac GS35 24U037\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 VAC Solenoid with Ni 120 RTD Feedback:\u003c\/strong\u003e Uses a 110 VAC solenoid for reliable valve actuation while the Ni 120 RTD provides accurate temperature feedback during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Dispensing:\u003c\/strong\u003e Applies adhesive at four locations simultaneously for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Configuration:\u003c\/strong\u003e Four dispense modules in a reduced-height design allow installation in packaging equipment with limited vertical clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal adhesive flow design helps reduce buildup and nozzle plugging to support cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Operation:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for InvisiPac Tank-Free Systems:\u003c\/strong\u003e Built for use with Graco InvisiPac hot melt delivery systems to support clean adhesive delivery and reduced maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35\u003c\/li\u003e\n\u003cli\u003eModel: 24U037\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: 110 VAC\u003c\/li\u003e\n\u003cli\u003eRTD Type: Ni 120 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ 110 VAC \/ Ni 120","offer_id":47723433754841,"sku":"GRACO 24U037","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u033-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941413"},{"product_id":"graco-24u038-invisipac-gs35-low-profile-quad-hot-melt-applicator","title":"Graco 24U038 InvisiPac GS35 Low-Profile Quad Hot Melt Applicator with No Solenoid and Ni 120 RTD","description":"\u003ch2\u003eInvisiPac GS35 Low-Profile Quad Applicator for High-Speed Packaging\u003c\/h2\u003e\n\u003cp\u003eThe Graco 24U038 InvisiPac GS35 low-profile quad hot melt applicator is designed for constant bead adhesive dispensing in high-speed case and carton sealing operations where vertical clearance is limited. The low-profile quad configuration supports uniform adhesive output across four dispense points while maintaining a compact height for integration into space-constrained packaging equipment. Built with a plug-free adhesive path, the GS35 helps reduce nozzle plugging and adhesive char, supporting cleaner operation and improved uptime in continuous industrial packaging environments.\u003c\/p\u003e\n\u003cp\u003eThis configuration operates without an onboard solenoid and incorporates a Ni 120 RTD to provide accurate temperature monitoring under system-controlled operation. Reaching operating temperature in under 10 minutes and functioning in an air-opened, spring-closed mode at cycle speeds exceeding 3,500 cycles per minute, the 24U038 functions as a dependable adhesive dispenser and dispense valve solution for industrial packaging equipment, box sealing, and manufacturing adhesive systems. Used with the Graco InvisiPac Tank-Free Hot Melt Delivery System, including HM10, HM25c, and HM50 models, the GS35 delivers clean, consistent adhesive flow system-wide.\u003c\/p\u003e\n\u003cp\u003eLooking for another InvisiPac GS35 configuration? \u003ca rel=\"noopener\" title=\"Graco InvisiPac GS35 Plug-Free Hot Melt Applicators\" href=\"\/collections\/graco-gs35-hot-melt-applicators\" target=\"_blank\"\u003eView the full GS35 applicator lineup here.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eQuad-Module Adhesive Application Advantages of the GS35 24U038\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Heat-Up and High-Speed Operation:\u003c\/strong\u003e Reaches operating temperature in under 10 minutes and supports cycle speeds up to 3,500 cycles per minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Point Constant Bead Dispensing:\u003c\/strong\u003e Applies adhesive at four locations simultaneously for consistent sealing on wide cartons and multi-lane packaging lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Quad Configuration:\u003c\/strong\u003e Four dispense modules in a reduced-height design allow installation in packaging equipment with limited vertical clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNi 120 RTD Temperature Feedback (No Solenoid):\u003c\/strong\u003e Designed for externally controlled systems, the Ni 120 RTD provides accurate temperature feedback while valve actuation is handled at the system level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Free-Flow Adhesive Path:\u003c\/strong\u003e Internal adhesive flow design helps reduce buildup and nozzle plugging to support cleaner operation and less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for InvisiPac Tank-Free Systems:\u003c\/strong\u003e Built for use with Graco InvisiPac hot melt delivery systems to support clean adhesive flow and reduced maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: InvisiPac GS35\u003c\/li\u003e\n\u003cli\u003eModel: 24U038\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt Applicator\u003c\/li\u003e\n\u003cli\u003eStyle: Low Profile - Quad\u003c\/li\u003e\n\u003cli\u003eNumber of Modules: 4\u003c\/li\u003e\n\u003cli\u003eMode of Operation: Air Opened, Spring Closed\u003c\/li\u003e\n\u003cli\u003eSpeed: \u0026gt; 3,500 cycles\/minute\u003c\/li\u003e\n\u003cli\u003eHeat-up Time: 10 minutes to 350°F (176°C) at 240 VAC\u003c\/li\u003e\n\u003cli\u003eHeater: 240 V\u003c\/li\u003e\n\u003cli\u003eSolenoid Valve Voltage Rating: None\u003c\/li\u003e\n\u003cli\u003eRTD Type: Ni 120 RTD\u003c\/li\u003e\n\u003cli\u003eMaximum Working Fluid Pressure: 1,500 psi (10.3 MPa, 103 bar)\u003c\/li\u003e\n\u003cli\u003eMinimum Working Air Pressure: 40 psi (0.3 MPa, 2.7 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Working Air Pressure: 80 psi (0.50 MPa, 5.5 bar)\u003c\/li\u003e\n\u003cli\u003eSuitable for Wash Down\/Waterwash Applications: No\u003c\/li\u003e\n\u003cli\u003eApprovals and Standards: UL 499 Listed, CSA88, CE, ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Low-Profile Quad \/ No Solenoid \/ Ni 120","offer_id":47723433820377,"sku":"GRACO 24U038","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-24u033-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1768941413"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/collections\/graco-24u034-invisipac-gs35-low-profile-quad-applicator-pt-100-rtd.jpg?v=1770916319","url":"https:\/\/www.hotmelt.com\/collections\/graco-invisipac-gs35-low-profile-quad-hot-melt-applicators.oembed","provider":"Hotmelt.com","version":"1.0","type":"link"}