{"title":"Laminating","description":"","products":[{"product_id":"high-performance-sprayable-hot-melt","title":"Tecbond 430 High Performance Sprayable Hot Melt","description":"\u003ch2\u003e\u003cstrong\u003ePower Adhesives Tecbond 430 Hot Melt Spray\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTecbond 430 high-performance hot melt has a long open time and can be applied in both bead or spray form, but it is most commonly sprayed. The open time leaves an aggressive adhesive surface for up to 6 minutes and is great for large surface areas and heat-sensitive substrates.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis sprayable hot melt adhesive is ideal for packaging materials, foam, plastic and wood. This hot melt can also be used in bead form. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eTec 430 Common Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecast\u003c\/li\u003e\n\u003cli\u003ePackaging\u003c\/li\u003e\n\u003cli\u003eProduct Assembly \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTecbond 430 Hot Melt Recommended Applicators\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSpray Applicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" title=\"Power Adhesives Tec 6300 Spray Hot Melt Gun\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/power-adhesives-tec-6300-pneumatic-spray-hot-melt-glue-gun\" target=\"_blank\"\u003eTec 6300\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Power Adhesives Tec 7300 Spray Hot Melt Glue Gun with Cartridge Feeder\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/tec-7300-pneumatic-spray-hot-melt-gun\"\u003eTec 7300\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtrusion Applicators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Power Adhesives Tec 6100 Extrusion Hot Melt Gun\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/tec-6100-pneumatic-extrusion-glue-gun\"\u003eTec 6100\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Power Adhesives Tec 7100 Extrusion Hot Melt Glue Gun\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/power-adhesives-tec-7100-multi-load-pneumatic-glue-gun\"\u003eTec 7100\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOther Spraytec Hot Melts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Tec 420 spray hot melt slug\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/general-purpose-sprayable-hot-melt\"\u003e\u003cstrong\u003e\u003c\/strong\u003eTec 420 - Medium open time\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Tec 425 long open time, sprayable hot melt.\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/tec-bond-425-sprayable-hot-melt\"\u003eTec 425 - Long open time\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Tecbond 430 sprayable hot melt with very long open time.\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/high-performance-sprayable-hot-melt\"\u003eTec 430 - Very long open time\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"Power Casttec 42 spray hot melt\" href=\"https:\/\/hotmelt-shop.myshopify.com\/products\/Casttec-42-precast-concrete-hot-melt\"\u003eCasttec 42 - Precast Concrete\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGlue Slugs Per Carton\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e22 lbs of glue slugs 1 3\/4\" is approximately 176 glue slugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStick Size: 1.75\" X 1.75\" Slug (43mm)\u003c\/li\u003e\n\u003cli\u003eCarton Quantity: 22lbs\u003c\/li\u003e\n\u003cli\u003ePallet Quantity: 1100 lbs (Contact for Bulk Pricing)\u003c\/li\u003e\n\u003cli\u003eApplication Temperature: 350 Degrees F\u003c\/li\u003e\n\u003cli\u003eSoftening Point: 221F\u003c\/li\u003e\n\u003cli\u003eHeat Resistance: 176F\u003c\/li\u003e\n\u003cli\u003eOpen Time: Up to 6 Minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e","brand":"Power Adhesives","offers":[{"title":"5 LB Sample Pack","offer_id":25974908939,"sku":"POW 430-43-043 CTN","price":69.0,"currency_code":"USD","in_stock":false},{"title":"22 LB Case","offer_id":40423915618494,"sku":"POW 430-43-043 CTN","price":302.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/power-adhesives-tecbond-430-43-043-43mm-glue-slugs.jpg?v=1766428487"},{"product_id":"wisdom-dx03hn-dextrin-laminating-adhesive","title":"Wisdom DX03HN Dextrin Laminating Water Based Adhesive","description":"\u003ch2\u003eWisdom DX03HN Water Based Adhesive Overview\u003c\/h2\u003e\n\u003cp\u003eThis Dextrin based adhesive is a low cost, high quality solution for adhesive laminating. The DX03HN is available in 5 gallon pails, drums, totes and tankers. Please contact us for bulk pricing on this product as we can provide shipping discounts as well as bulk price breaks. \u003c\/p\u003e\n\u003ch3\u003eWhy You Should Buy from Hotmelt.com\u003c\/h3\u003e\n\u003cp\u003eHotmelt.com is the industry leader in hot melt and cold glue solutions. We have customers all over the world and have application experience second to none. We also have exceptional pricing and customer service to insure the long term success of your project. \u003c\/p\u003e\u003c!-- split --\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n \t\u003cli\u003eViscosity: 2,000 cps @ 75 Degrees F\u003c\/li\u003e\n \t\u003cli\u003eTotal Solids: 58%\u003c\/li\u003e\n \t\u003cli\u003eColor: Amber\u003c\/li\u003e\n \t\u003cli\u003eApplications: Laminating\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Wisdom Adhesives","offers":[{"title":"Default Title","offer_id":27520451787,"sku":"WISDOM DX03HN","price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/wisdom-dx03hn-dextrin-adhesive.jpg?v=1487856089"},{"product_id":"jowat-jowacoll-148-60-primer-for-hpl-water-based-adhesive","title":"Jowat Jowacoll 148.60 Primer for HPL Water Based Adhesive","description":"\u003ch2\u003eAbout Jowacoll 148.60 PVA HPL Primer Adhesive\u003c\/h2\u003e\n\u003cp\u003eJowat Jowacoll 148.60 is a water based PVA adhesive that serves a couple of different purposes. It is often used as a primer for HPL substrates that will be bonded with Jowatherm EVA hot melts. 148.60 is also used for laminating vinyl films, both standard and reverse printed, as well as laminating non-impregnated paper foils to wood substrates. \u003c\/p\u003e\n\u003ch3\u003eHow to Apply 148.60\u003c\/h3\u003e\n\u003cp\u003eWhen using Jowacoll 148.60 as an HPL primer for edgebanding, the adhesive should be mixed with a 1:1 water to adhesive ratio. Brush on the mixture with an even coating and let fully dry before applying your Jowatherm EVA hot melt. \u003c\/p\u003e\n\u003ch3\u003eJowacoll 148.60 Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow to medium viscosity\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion\u003c\/li\u003e\n\u003cli\u003eDesigned for priming HPL edgebanding substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eJowacol 148.60 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eViscosity: 2000 (Brookfield)\u003c\/li\u003e\n\u003cli\u003eDensity: 8.7 lbs\/Gal\u003c\/li\u003e\n\u003cli\u003eSolids: 70%\u003c\/li\u003e\n\u003cli\u003epH Value: 4-5\u003c\/li\u003e\n\u003cli\u003eColor: Clear\/Translucent\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003ch2\u003eResources\u003c\/h2\u003e\u003cstrong\u003eData Sheets and Brochures\u003c\/strong\u003e\n\u003cul\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/14860_PRIMER_TDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 148.60 Technical Data Sheet (TDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/14860_SDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 148.60 Safety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/Jowat_Product_Guide_-_Q1_2017.pdf?16035867583880320642\" target=\"_blank\"\u003eJowat Adhesives Product Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jowat Adhesives","offers":[{"title":"Default Title","offer_id":28075354891,"sku":"JOW 148.60 PL (45)","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/jowat-jowacoll-5-gallon-bucket.jpg?v=1489067457"},{"product_id":"jowat-jowacoll-103-40-hpl-laminating-water-based-adhesive","title":"Jowat Jowacoll 103.40 HPL Laminating Water Based Adhesive","description":"\u003ch2\u003eAbout Jowacoll 103.40 Water Based Adhesive\u003c\/h2\u003e\n\u003cp\u003eJowat Jowacol 103.40 (10340) is a water based PVAc adhesive that has a number of uses including general assembly, laminating HPL and cold press applications. 103.40 has is a low viscosity cold glue with a medium to fast open time allowing it to penetrate wood substrates well.\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eJowacoll 103.40 Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow viscosity\u003c\/li\u003e\n\u003cli\u003eMedium\/Fast open time\u003c\/li\u003e\n\u003cli\u003eFor woodworking, general assembly and lamination of HPL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eJowacol 103.40 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGlue Thickness: 3-6 mil wet = 10-16 g\/sqft\u003c\/li\u003e\n\u003cli\u003eOpen Time: 8-10 minutes\u003c\/li\u003e\n\u003cli\u003ePressing Time: 15-40 minutes\u003c\/li\u003e\n\u003cli\u003ePressure: 30 psi minimum\u003c\/li\u003e\n\u003cli\u003eViscosity: 12,000 (Brookfield)\u003c\/li\u003e\n\u003cli\u003eDensity: 9.1 lbs\/Gal\u003c\/li\u003e\n\u003cli\u003eSolids: 50%\u003c\/li\u003e\n\u003cli\u003epH Value: 4-5\u003c\/li\u003e\n\u003cli\u003eColor: White\/opaque\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003ch2\u003eResources\u003c\/h2\u003e\u003cstrong\u003eData Sheets and Brochures\u003c\/strong\u003e\n\u003cul\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/10340_TDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 103.40 Technical Data Sheet (TDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/10340_SDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 103.40 Safety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/Jowat_Product_Guide_-_Q1_2017.pdf?16035867583880320642\" target=\"_blank\"\u003eJowat Adhesives Product Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jowat Adhesives","offers":[{"title":"Default Title","offer_id":28075417995,"sku":"JOW 103.40 DR (45)","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/jowat-jowacoll-5-gallon-bucket_38960a91-f0a0-4cae-9a4f-4668e61a0955.jpg?v=1489068195"},{"product_id":"jowat-jowacoll-107-50-water-resistant-pre-catalyzed-type-ii-water-based-adhesive","title":"Jowat Jowacoll 107.50 Water Resistant Pre-Catalyzed Type II Water Based Adhesive","description":"\u003ch2\u003eAbout Jowacoll 107.50 Water Based Adhesive\u003c\/h2\u003e\n\u003cp\u003eJowat Jowacoll 107.50 is a water resistant, pre-catalyzed Type II water based adhesive. It is often used for KA edgebanding, general assembly and assembly of windows and furniture that will end up in humid\/moist environments like bathrooms and kitchens. \u003c\/p\u003e\n\u003cp\u003e107.50 is a self-crosslinking PVAc adhesive with excellent bond strength. We do recommend caution when using with veneer in flat press applications as it can cause discoloration. \u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eJowacoll 107.50 Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly water resistant\u003c\/li\u003e\n\u003cli\u003eSelf-crosslinking PVAc adhesive\u003c\/li\u003e\n\u003cli\u003eFor edgebanding, woodworking and assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eJowacol 107.50 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen Time: 6-8 minutes\u003c\/li\u003e\n\u003cli\u003ePressing Time: 10-15 minutes\u003c\/li\u003e\n\u003cli\u003ePressure: 30 psi minimum\u003c\/li\u003e\n\u003cli\u003eViscosity: 6,000 (Brookfield)\u003c\/li\u003e\n\u003cli\u003eDensity: 9.1 lbs\/Gal\u003c\/li\u003e\n\u003cli\u003eSolids: 50%\u003c\/li\u003e\n\u003cli\u003epH Value: 3\u003c\/li\u003e\n\u003cli\u003eColor: White\/translucent with UV indicator\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- split --\u003e\u003ch2\u003eResources\u003c\/h2\u003e\u003cstrong\u003eData Sheets and Brochures\u003c\/strong\u003e\n\u003cul\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/10750_TDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 107.50 Technical Data Sheet (TDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/10750_SDS.pdf?13742449799058708731\" target=\"_blank\"\u003eJowat 107.50 Safety Data Sheet (SDS)\u003c\/a\u003e\u003c\/li\u003e\n \t\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/Jowat_Product_Guide_-_Q1_2017.pdf?16035867583880320642\" target=\"_blank\"\u003eJowat Adhesives Product Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Jowat Adhesives","offers":[{"title":"Default Title","offer_id":28075544203,"sku":"JOW 107.50 PL (45)","price":136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/jowat-jowacoll-5-gallon-bucket_fcdcb50b-b8e2-4bbe-becd-0cb71c722a53.jpg?v=1489069030"},{"product_id":"bulk-hot-melt-for-wire-lamination-in-filter-assembly","title":"Bulk Hot Melt for Wire Lamination in Filter Assembly","description":"\u003ch2\u003eAbout Bulk Hot Melt for Wire Lamination in Filter Assembly \u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eSample Case - \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca title=\"Contact Us\" href=\"\/pages\/contact-us\" target=\"_blank\"\u003eContact Us\u003c\/a\u003e\u003cspan\u003e for Bulk Pricing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInfinity Bond E2180  provides an excellent blend of affordable price and excellent performance. Specially formulated bulk hot melt for wire lamination applications in filter assembly. The Infinity bond E2180 offers great adhesion to all types of media and polypropylene. It is also suitable for line speeds up to 300 ft. per minute. \u003c\/p\u003e\n\u003ch2\u003eWhy Buy from Hotmelt.com\u003c\/h2\u003e\n\u003cp\u003eHotmelt.com offers a low price guarantee on the E2180 and all hot melt filter products. \u003ca href=\"\/pages\/contact-us\" title=\"Contact us about Filter Hot melt\"\u003eOur adhesive experts\u003c\/a\u003e are ready to help you find the perfect hot melt for your filter assembly applications. \u003c\/p\u003e\u003c!-- split --\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eService Temperature Range: \u003c\/strong\u003e20°F - 150°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids: \u003c\/strong\u003e100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity at Application Temperature: \u003c\/strong\u003e1300 cp - 350°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Range: \u003c\/strong\u003e300°F-375°F\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":31092455669783,"sku":"INFINITY IM-E2180-FILTER","price":1.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/infinity-e2180-bulk-hot-melt-for-wire-lamination-in-filter-assembly.png?v=1709244742"},{"product_id":"infinity-bond-enviromelt-biodegradable-and-compostable-hot-melt-adhesive","title":"EnviroMelt 100 Biodegradable Packaging and Product Assembly Hot Melt Adhesive","description":"\u003ch2\u003eInfinity Bond EnviroMelt Biodegradable Hot Melt Adhesive\u003c\/h2\u003e\n\u003cp\u003eThe Infinity Bond EnviroMelt 100 bulk hot melt is \u003cspan data-contrast=\"none\"\u003ebiodegradable and a high-performance adhesive\u003c\/span\u003e. EnviroMelt can replace traditional petroleum-based hot melts in a wide range of applications including bookbinding, carton closing, product assembly, and laminating applications. The Infinity Bond EnviroMelt 100 adhesive is non-flammable and eliminates the need to inventory volatile solvents and caustic cleaners. It features strong bonds at -20\u003cspan\u003e°F for frozen foods and sustains elevated temperatures up to 300°F. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eEnviroMelt 100 is Safer and Uses Less Energy\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe Infinity Bond EnviroMelt 100 hot melt adhesive reduces energy requirements by up to 50% - melting at 140°F-150°F instead of 2750°-400°F like traditional hot melts. This low melting temperature also makes dispensing much safer and eliminates potential burns. The Infinity Bond EnviroMelt 100 also features a very high tack, resulting in potentially higher line speeds than cold glues. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnviroMelt 100 replaces non-biodegradable hot melt adhesives, cold glues, and pressure-sensitive tapes. It is also approved for use as a food packaging adhesive under Code of Federal Regulations, Title 21, C.F.R. 175.105.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca rel=\"noopener noreferrer\" title=\"A Complete Guide to Biodegradable and Compostable Hot Melt Adhesive\" href=\"\/blogs\/blog\/complete-guide-to-biodegradable-and-compostable-hot-melt-adhesives\" target=\"_blank\"\u003eGuide to Biodegradable Adhesives\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBookbinding\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCarton Sealing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eLamination \u003c\/li\u003e\n\u003cli\u003eBonding Paper Products\u003c\/li\u003e\n\u003cli\u003eProduct Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreeze-Thaw Stable: \u003c\/strong\u003eYes, you do not have to ship by heated transportation \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity: \u003c\/strong\u003e800-1,100 cps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefracted Solids %: \u003c\/strong\u003e55.75% +\/- 3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor: \u003c\/strong\u003eOpaque Colors - varies widely due to the use of recycled collagens\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Application Temperature: \u003c\/strong\u003e140°F-158°F, could vary slightly)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf-Life: \u003c\/strong\u003eStored properly in a cool dry environment, 24 months\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Clean-Up: \u003c\/strong\u003eUp to 158°F (warm-hot water only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOther Biodegradable Products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hotmelt.com\/products\/biodegradable-automated-bulk-packaging-hot-melt\"\u003eTecbond 110B Biodegradable Bulk Hot Melt\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hotmelt.com\/\/products\/biodegradable-hot-melt-pellets\"\u003eTecbond 214B Biodegradable Pellets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hotmelt.com\/products\/1-2-biodegradable-hot-melt-glue-sticks\"\u003eBiodegradable Glue Sticks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hotmelt.com\/products\/5-8-biodegradable-hot-melt-glue-sticks\"\u003eBiodegradable Large Hot Glue Sticks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hotmelt.com\/products\/biodegradable-hot-melt-slugs\"\u003eBiodegradable Hot Glue Slugs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":31220041482263,"sku":"INFINTY HM-ENVIROMELT-100","price":1.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/EnviroMelt-100-2.png?v=1581439835"},{"product_id":"infinity-bond-wb8450-clear-pressure-sensitive-water-based-adhesives","title":"Infinity Bond WB8450 Clear Pressure Sensitive Water Based Adhesives","description":"\u003ch2\u003eInfinity Bond WB8450 Clear Pressure Sensitive Water Based Adhesive Overview\u003c\/h2\u003e\n\u003cp\u003eInfinity Bond WB8450 is mechanically stable and has excellent tack, peel, and shear characteristics. The dried film of Infinity Bond WB8450 is completely clear and has excellent water resistance. The film also resists discoloration and bleed through with aging and degradation by ultraviolet light, oxygen, and ozone. \u003c\/p\u003e\n\u003ch3\u003eFeatures of Infinity Bond WB8450\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent tack, peel and shear Characteristics\u003c\/li\u003e\n\u003cli\u003eDries completely clear\u003c\/li\u003e\n\u003cli\u003eResists discoloration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplications of Infinity Bond WB8450 \u003c\/h3\u003e\n\u003cp\u003eInfinity Bond Wb8450 is suitable for use in permanent pressure sensitive applications including labels, tapes, and decals. It can also be used as an adhesive for laminating plastic films to scrims and nonwovens. It can also be very effective in decorative vinyl chloride film applications. \u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eTypical Emulsion Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSolids: 55% (+\/-2%)\u003c\/li\u003e\n\u003cli\u003eViscosity @ 25\u003cspan\u003e°C: 800-1200cps\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003epH: 4.5-6.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProtective Colloid: Cellulosic and Anionic Surfactant\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMechanical Stability: Excellent\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFreeze Thaw Stability: Poor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThickening Response: Low\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReaction to Borax: Stable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWet Tack: Low\/Medium\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eWeight, lbs\/gal: 8.5\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Film Properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWater Resistance: Excellent\u003c\/li\u003e\n\u003cli\u003eTg (\u003cspan\u003e°C): -28\u003cspan\u003e°\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eFilm Clarity: Clear\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eDry Tack, lb\/in, SS: 2.2\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cspan\u003eStatic Sheer, hr (Cohesion): 4\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":39383001071806,"sku":"INF WB-8450","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/InfinityBondWB8450.png?v=1616446289"},{"product_id":"infinity-bond-wb8480-workhorse-laminating-water-based-adhesive","title":"Infinity Bond WB8480 Workhorse Laminating Water Based Adhesive","description":"\u003ch2\u003eInfinity Bond WB8480 Workhorse Laminating Water Based Adhesive Overview\u003c\/h2\u003e\n\u003cp\u003eInfinity Bond WB8480 is a premium water-based adhesive that is specifically designed to provide excellent adhesion of coated and difficult substrates. Infinity Bond WB8480 displays high strength bonds, improved machining, and excellent wet tack. \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures of Infinity Bond WB8480 \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength bonds\u003c\/li\u003e\n\u003cli\u003eImproved machining\u003c\/li\u003e\n\u003cli\u003eExcellent wet tack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolids: 56.0% (+\/- 2%)\u003c\/li\u003e\n\u003cli\u003eViscosity: 2,500cps (+\/- 500)\u003c\/li\u003e\n\u003cli\u003epH: 4.0 – 6.0\u003c\/li\u003e\n\u003cli\u003eColor: White, dries clear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":39383378329790,"sku":"INFINITY WB8480-5GAL","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/infinitybondwb8480.png?v=1616446331"},{"product_id":"infinity-bond-wb9070-dextrin-water-based-adhesive-for-use-with-pot-devin-laminators","title":"Infinity Bond WB9070 Dextrin Water Based Adhesive for Use with Pot Devin Laminators","description":"\u003ch2\u003eInfinity Bond WB9070 Dextrin Water Based Adhesive for Use with Pot Devin Laminators\u003c\/h2\u003e\n\u003cp\u003eThe Infinity Bond WB9070 Dextrin Water Based Adhesive is a starch-based (dextrin) adhesive for use with Pot Devin Laminators. This non-toxic and bio-degradable product provides excellent bonding to paper, paperboard, and other similarly porous materials. Infinity Bond WB 9070\u003cspan\u003e offers an excellent blend of tack, lay-flat, and set speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eBase Chemistry: Dextrin\u003c\/p\u003e\n\u003cp\u003eSolids %: 57%\u003c\/p\u003e\n\u003cp\u003eViscsosity at Application Temperature: 2200 cps @ 77°F\u003c\/p\u003e\n\u003c!-- split --\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":39384062853310,"sku":"INF WB-9070-5GAL PL","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/InfinityBondWB9070.png?v=1616609511"},{"product_id":"infinity-bond-wb8300-pressure-sensitive-water-based-adhesive","title":"Infinity Bond WB8300 Pressure Sensitive Water Based Adhesive","description":"\u003ch2\u003eInfinity Bond WB8300 Pressure Sensitive Water Based Adhesive\u003c\/h2\u003e\n\u003cp\u003e Infinity Bond WB8300 is a pressure-sensitive water based adhesive that is great for folding carton windows. WB8300 is an aggressive PSA, similar to flypaper. This high solids water based adhesive perfect for applications using difficult or coated stocks.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cp\u003eInfinity Bond WB8300 general-purpose pressure-sensitive adhesive, suitable for use as a window adhesive for folding cartons. Complies with FDA indirect food additives 21 CFR 175.105.\u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\u003c!-- split --\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eViscosity at 75°F: 2,000 cps\u003c\/li\u003e\n\u003cli\u003eSolids content: 68%\u003c\/li\u003e\n\u003cli\u003epH: 5\u003c\/li\u003e\n\u003cli\u003eDensity: 1.03\u003c\/li\u003e\n\u003cli\u003eAppearance: White liquid\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Infinity Bond","offers":[{"title":"Default Title","offer_id":39384875106494,"sku":"INFINITY WB8300 - 5 GAL","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/InfinityBondWb8300.png?v=1616446046"},{"product_id":"henkel-technomelt-pur-3631-hot-melt-cartridge","title":"Henkel Technomelt PUR 3631 Hot Melt","description":"\u003ch2\u003eHenkel Technomelt PUR 3631 Hot Melt Overview\u003c\/h2\u003e\n\u003cp\u003eTechnomelt PUR 3631 is an off-white, high viscosity, industrial grade polyurethane PUR hot melt adhesive. It has a medium open time and cures with moisture to a tough thermoset plastic.\u003c\/p\u003e\n\u003cp\u003eIt is designed for bonding and laminating applications where fast green strength and excellent structural and mechanical properties are desired. Common substrates include ABS and epoxy.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial grade adhesive\u003c\/li\u003e\n\u003cli\u003eHigh viscosity\u003c\/li\u003e\n\u003cli\u003eModerate open time\u003c\/li\u003e\n\u003cli\u003eDesigned for bonding and laminating applications where fast green strength and excellent structural and mechanical properties are desired\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Technomelt PUR 3631\u003c\/li\u003e\n\u003cli\u003eType: Polyurethane Hot Melt (PUR)\u003c\/li\u003e\n\u003cli\u003eApplication: Bonding\u003c\/li\u003e\n\u003cli\u003eChemistry: Polyurethane\u003c\/li\u003e\n\u003cli\u003eComponents: One Component - Requires No Mixing\u003c\/li\u003e\n\u003cli\u003eAppearance: Off-White\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eViscosity, Brookfield: High; Approx. 10,000 to 15,000 cps @ 250°F (121°C)\u003c\/li\u003e\n\u003cli\u003eOpen Time: 40 to 80 Seconds\u003c\/li\u003e\n\u003cli\u003eCuring Temperature: 248°F (120°C)\u003c\/li\u003e\n\u003cli\u003eShore Hardness: 34\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTensile Strength: 2,100 psi (14.5 N\/mm²)\u003c\/li\u003e\n\u003cli\u003eTensile Modulus: 15,330 psi (105.7 N\/mm²)\u003c\/li\u003e\n\u003cli\u003eElongation: 1,150%\u003c\/li\u003e\n\u003cli\u003eWater Absorption: 2.26%\u003c\/li\u003e\n\u003cli\u003eTemperature Creep Resistance: 338°F (170°C)\u003c\/li\u003e\n\u003cli\u003ePackage: 10 oz. (300 ml) Cartridge Size or 5 Gallon Pail\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Technomelt","offers":[{"title":"300 ml Cartridge (Case of 6)","offer_id":39824719577278,"sku":"LOCTITE 237145","price":50.0,"currency_code":"USD","in_stock":false},{"title":"5 Gallon Pail","offer_id":43866583695577,"sku":"LOCTITE 237305","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/technomelt-pur-3631-cartridge.jpg?v=1622147400"},{"product_id":"henkel-technomelt-pur-4663-hot-melt","title":"Henkel Technomelt PUR 4663 Hot Melt","description":"\u003ch2\u003eHenkel Technomelt PUR 4663 Hot Melt Overview\u003c!----\u003e\n\u003c\/h2\u003e\n\u003cp\u003eTechnomelt PUR 4663 is a light-ivory-colored, multi-purpose reactive hotmelt that is used in panel bonding. It undergoes an additional crosslinking reaction after cooling. It shows high initial strength in combination with relatively long open time - assembly is possible after cooling of the adhesive. After curing the product has duroplastic properties and very high heat and cold resistance. Suitable for flat lamination and assembly application in industrial production.\u003c\/p\u003e\n\u003ch3\u003eFeatures and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh initial strength\u003c\/li\u003e\n\u003cli\u003eReactive hotmelt adhesive system based on polyurethane\u003c\/li\u003e\n\u003cli\u003eChemical cross-linking within a few days\u003c\/li\u003e\n\u003cli\u003eBond joint turns into a thermoset\u003c\/li\u003e\n\u003cli\u003eVery high heat resistance \u0026gt;302°F (\u0026gt;150°C) and cold flexibility\u003c\/li\u003e\n\u003cli\u003eExcellent water resistance\u003c\/li\u003e\n\u003cli\u003eFluorescent (UV-light)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Technomelt PUR 4663\u003c\/li\u003e\n\u003cli\u003eType: Polyurethane Hot Melt (PUR)\u003c\/li\u003e\n\u003cli\u003eApplication: General Assembly, Lamination, Assembly Bonding of Wooden Parts, and Gluing of Textiles \u0026amp; Plastics\u003c\/li\u003e\n\u003cli\u003eChemistry: Polyurethane\u003c\/li\u003e\n\u003cli\u003eAppearance: Translucent Solid\u003c\/li\u003e\n\u003cli\u003eRecommended Working Temperature: 212°F to 284°F (100°C to 140°C)\u003c\/li\u003e\n\u003cli\u003eRecommended Application Amount: 50 g\/m² to 400 g\/m²\u003c\/li\u003e\n\u003cli\u003eSoftening Point, Ring \u0026amp; Ball: Approx. 149°F (65°C)\u003c\/li\u003e\n\u003cli\u003eViscosity, Brookfield: Approx. 10,000 cps @ 266°F (130°C)\u003c\/li\u003e\n\u003cli\u003eOpen Time: 8 Minutes\u003c\/li\u003e\n\u003cli\u003eHeat Resistance: \u0026gt;302°F (150°C)\u003c\/li\u003e\n\u003cli\u003eCuring Time to Final Strength: 2 to 5 Days - Depending on Substrate\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShelf Life: 1 Year - If Unopened in Original Packaging\u003c\/li\u003e\n\u003cli\u003ePackage: 5 Gallon Pail\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Technomelt","offers":[{"title":"5 Gallon Pail","offer_id":43866746585305,"sku":"LOCTITE 555170","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/HenkelTechnomelt-PUR-4663-Hot-Melt-Pail_1.jpg?v=1681313459"},{"product_id":"henkel-technomelt-pur-508-hot-melt","title":"Henkel Technomelt PUR 508 Hot Melt","description":"\u003ch2\u003eHenkel Technomelt PUR 508 Hot Melt Overview\u003c\/h2\u003e\n\u003cp class=\"productDetail__description\" _ngcontent-jaq-c211=\"\"\u003eTechnomelt PUR 508 is a polyurethane reactive hot melt adhesive that cures with moisture to form a tough, strong, and nearly thermoset polymer. It features aggressive tack, a short to medium open time, and high green strength. This adhesive is ideal for laminating and assembling sandwich panel elements made of wood, lauan, fiberboard, particleboard, plywood, FRP, EPS foam, PU foam, surface-treated metals, and soft plastics.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures and Benefits\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eForms a tough, strong and virtually thermoset polymer\u003c\/li\u003e\n\u003cli\u003eHas short to medium open time and high green strength\u003c\/li\u003e\n\u003cli\u003eAggressive tack\u003c\/li\u003e\n\u003cli\u003eSuitable for porous substrates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Technomelt PUR 508\u003c\/li\u003e\n\u003cli\u003eType: Polyurethane Hot Melt (PUR)\u003c\/li\u003e\n\u003cli\u003eApplication: Structural Bonding\u003c\/li\u003e\n\u003cli\u003eApplication Method: Extrusion, Hot Applied, Roll-Coat, Spray\u003c\/li\u003e\n\u003cli\u003eRecommended For Use With: Fiberboard, Fiberglass Reinforced Plastic (FRP), Foam, Lauan, Particle Board, Plastic, Plywood, Polyurethane Foam, Wood\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChemistry: Polyurethane\u003c\/li\u003e\n\u003cli\u003eComponents: One-Component\u003c\/li\u003e\n\u003cli\u003eCure Type: Moisture Curing\u003c\/li\u003e\n\u003cli\u003eAppearance: Off White\u003c\/li\u003e\n\u003cli\u003eViscosity: Approx. 12,000 cps @ 250°F (121°C)\u003c\/li\u003e\n\u003cli\u003eOpen Time: Approx. 40 Seconds\u003c\/li\u003e\n\u003cli\u003ePackage: 5 Gallon Pail or 55 Gallon Barrel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Technomelt","offers":[{"title":"5 Gallon Pail","offer_id":43866779058393,"sku":"LOC 840433","price":50.0,"currency_code":"USD","in_stock":false},{"title":"55 Gallon Barrel","offer_id":43866779025625,"sku":"LOCTITE 542663","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/HenkelTechnomelt-PUR-508-Hot-Melt-Pail.jpg?v=1681316596"},{"product_id":"henkel-technomelt-pur-3631-hot-melt","title":"Henkel Technomelt PUR 513C Hot Melt","description":"\u003ch2\u003eHenkel Technomelt PUR 513C Hot Melt Overview\u003c\/h2\u003e\n\u003cp\u003eTechnomelt PUR 513C is a one-component polyurethane reactive hot melt adhesive. It is formulated to provide aggressive tack, extended open time, and high green strength. The adhesive cures by reacting with moisture to form a tough, strong, and nearly thermoset polymer. Technomelt PUR 513C is suitable for laminating sandwich panel elements made of wood, lauan, fiberboard, particleboard, plywood, FRP, EPS foam, PU foam, and surface-treated metals.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFeatures and Benefits\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAggressive tack, long open time and high green strength\u003c\/li\u003e\n\u003cli\u003eCan be used for lamination of sandwich panel elements of wood, lauan, fiberboard, particleboard, plywood, FRP, EPS foam, PU foam and surface treated metals\u003c\/li\u003e\n\u003cli\u003eCan be applied by roll coating, extrusion, swirl spray or reactivation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: Technomelt PUR 513C\u003c\/li\u003e\n\u003cli\u003eType: Polyurethane Hot Melt (PUR)\u003c\/li\u003e\n\u003cli\u003eApplication: General Assembly\u003c\/li\u003e\n\u003cli\u003eApplication Method: Roll Coating, Extrusion, Swirl Spray, or Reactivation\u003c\/li\u003e\n\u003cli\u003eChemistry: Polyurethane\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComponents: One-Component\u003c\/li\u003e\n\u003cli\u003eCure Type: Moisture Curing\u003c\/li\u003e\n\u003cli\u003eAppearance: Off-White Solid\u003c\/li\u003e\n\u003cli\u003eRecommended Application Temperature: 250°F (121.1°C)\u003c\/li\u003e\n\u003cli\u003eViscosity: Approx. 12,000 cps @ 250°F (121°C)\u003c\/li\u003e\n\u003cli\u003eOpen Time: Approx. 3 to 4 Minutes\u003c\/li\u003e\n\u003cli\u003eShelf Life: 6 Months - In an Unopened Container\u003c\/li\u003e\n\u003cli\u003ePackage: 5 Gallon Pail or 55 Gallon Barrel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Henkel Technomelt","offers":[{"title":"5 Gallon Pail","offer_id":43866974552281,"sku":"LOCTITE 515272","price":50.0,"currency_code":"USD","in_stock":false},{"title":"55 Gallon Barrel","offer_id":43866974585049,"sku":"LOCTITE 542817","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/products\/HenkelTechnomelt-PUR-513C-Hot-Melt-Pail.jpg?v=1681327070"},{"product_id":"graco-therm-o-flow-200-hot-melt-system","title":"Graco Therm-O-Flow 200 Bulk Hot Melt System for 55-Gallon Drums","description":"\u003ch2\u003eGraco Therm-O-Flow 200 Hot Melt System for 55-Gallon Drums\u003c\/h2\u003e\n\u003cp\u003eThe Therm-O-Flow 200 is Graco’s premier solution for bulk hot melt applications, designed for 55-gallon (200 L) drums and engineered to handle a wide range of adhesive materials with ease. It delivers exceptional melt rates and consistent flow, supported by precise temperature zoning that protects material integrity and maximizes adhesive performance. From pressure-sensitive adhesives and PURs to epoxies and advanced resin blends, the system meets the demands of high-throughput, industrial-scale production.\u003c\/p\u003e\n\u003cp\u003eCombining advanced automation, seamless line integration, and durable components, the Therm-O-Flow 200 is designed to support continuous operation in the most demanding environments. It’s a smart, scalable solution for manufacturers needing reliable performance and industry-leading efficiency at volume.\u003c\/p\u003e\n\u003cp\u003eNeed a smaller footprint? Explore the \u003ca rel=\"noopener\" title=\"Graco Therm-O-Flow 20 Bulk Hot Melt System\" href=\"\/products\/graco-therm-o-flow-20-hot-melt-system\" target=\"_blank\"\u003eTherm-O-Flow 20\u003c\/a\u003e for 5-gallon pail applications.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qvmA9cR3xtc?si=3TVGOAPkgY5GXaW_\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Features of the Graco Therm-O-Flow 200\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial-Scale Output:\u003c\/strong\u003e Delivers up to 11 lb\/min melt rate—ideal for high-volume bonding, sealing, and assembly lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMega-Flo™ Platen Advantage:\u003c\/strong\u003e Maximizes heat transfer and melt rate while reducing char and adhesive waste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Pump Design:\u003c\/strong\u003e The Severe-Duty™ Check-Mate® pump offers reliable performance in continuous-use, abrasive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Temperature Control:\u003c\/strong\u003e Supports up to 12 independent heat zones to handle a wide variety of hot melt formulations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Smart Controls:\u003c\/strong\u003e Real-time diagnostics, material tracking, and USB data exports simplify system monitoring and QA processes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Operation:\u003c\/strong\u003e Easily link with other Therm-O-Flow units to double capacity or scale heat zones to 24.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService-Friendly Architecture:\u003c\/strong\u003e Fast-change cartridges, low\/empty level sensors, and accessible components reduce downtime and maintenance labor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSystem Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Therm-O-Flow 200\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt System\u003c\/li\u003e\n\u003cli\u003ePump Style: Check-Mate Priming Pump\u003c\/li\u003e\n\u003cli\u003eCompatible Materials: Pressure-Sensitive Adhesives (PSA), Polyurethane Reactive (PUR), Polyamide, Ethylene Vinyl Acetate (EVA), Polyisobutylene (PIB), Butyle Rubber, Epoxies, Prepreg Resin Mixes, Warm Melt Sealer, and much more...\u003c\/li\u003e\n\u003cli\u003eContainer Compatibility: 55-Gallon (200L) Drums\u003c\/li\u003e\n\u003cli\u003eMaximum Melt Rate: 11 lb\/min (5 kg\/min)\u003c\/li\u003e\n\u003cli\u003eMaximum Flow Rate: 12 lb\/min (5.4 kg\/min)\u003c\/li\u003e\n\u003cli\u003eViscosity Compatibility: Low to Ultra High\u003c\/li\u003e\n\u003cli\u003eEffective Area: 1.24 in²\u003c\/li\u003e\n\u003cli\u003eMaximum Fluid Working Pressure: 3,000 psi (206.8 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Temperature: 400°F (204°C)\u003c\/li\u003e\n\u003cli\u003ePump Cycles per 1 Gallon: 21\u003c\/li\u003e\n\u003cli\u003eVolume per Cycle: 11.7 in³\u003c\/li\u003e\n\u003cli\u003ePower Input: 220\/240V, 380\/400V, 470\/490V, 575V\u003c\/li\u003e\n\u003cli\u003ePeak Power Consumption: 25 - 30.2 KVA (varies by configuration)\u003c\/li\u003e\n\u003cli\u003eWeight: 1630 lbs (739 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustries \u0026amp; Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive interior \u0026amp; RV lamination\u003c\/li\u003e\n\u003cli\u003eInsulating glass assembly\u003c\/li\u003e\n\u003cli\u003eWindow \u0026amp; door fabrication\u003c\/li\u003e\n\u003cli\u003eElectronics \u0026amp; solar panel manufacturing\u003c\/li\u003e\n\u003cli\u003eTape, label \u0026amp; bookbinding\u003c\/li\u003e\n\u003cli\u003eComposite panel \u0026amp; furniture bonding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":46709562310873,"sku":"GRACO TOF200","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-therm-o-flow-200-hot-melt-system.jpg?v=1750178051"},{"product_id":"graco-therm-o-flow-20-hot-melt-system","title":"Graco Therm-O-Flow 20 Bulk Hot Melt System for 5-Gallon Pails","description":"\u003ch2\u003eGraco Therm-O-Flow 20 Hot Melt System for 5-Gallon Pails\u003c\/h2\u003e\n\u003cp\u003eThe Therm-O-Flow 20 is a compact, high-efficiency bulk hot melt system engineered specifically for 5-gallon (20 L) pail applications. Designed to handle a wide range of adhesive viscosities, it combines precise temperature control, customizable heat zones, and advanced pump technology to ensure smooth, reliable dispensing with minimal waste. Whether you're working with PUR, EVA, or PSA adhesives, the system delivers consistent flow rates and superior thermal control to protect material integrity.\u003c\/p\u003e\n\u003cp\u003eBuilt for manufacturing, assembly, and laminating environments, the Therm-O-Flow 20 supports continuous operation with quick-change components and smart integration features. Its scalable design also allows for tandem configuration, expanding your control to up to 24 heat zones when paired with another unit—ideal for growing production needs.\u003c\/p\u003e\n\u003cp\u003eLooking for high-volume drum dispensing? Explore the \u003ca href=\"\/products\/graco-therm-o-flow-200-hot-melt-system\" title=\"Graco Therm-O-Flow 200 Bulk Hot Melt System\" rel=\"noopener\" target=\"_blank\"\u003eTherm-O-Flow 200\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qvmA9cR3xtc?si=3TVGOAPkgY5GXaW_\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eKey Advantages of Therm O Flow for 5 Gal Pails\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficient Material Handling:\u003c\/strong\u003e Two-ball or Check-Mate priming pump options deliver up to 12 lb\/min (5.4 kg\/min) with minimal pulsation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePail-Ready Design:\u003c\/strong\u003e Optimized for standard 5-gallon (20 L) pails—compact layout for tight workspaces.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom Heat Zoning:\u003c\/strong\u003e Control up to 12 independent zones to match diverse hot melt chemistries.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrecise Temperature Control:\u003c\/strong\u003e Digital display prevents overheating, ensuring consistent viscosity and bond quality.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRapid Serviceability:\u003c\/strong\u003e Quick-change cartridges and low-level sensors cut downtime.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScalable Integration:\u003c\/strong\u003e Link two units for tandem operation—supporting up to 24 heat zones.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUser-Friendly Interface:\u003c\/strong\u003e Intuitive controls and real-time diagnostics make setup and adjustments a breeze.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Therm-O-Flow 20\u003c\/li\u003e\n\u003cli\u003eType: Hot Melt System\u003c\/li\u003e\n\u003cli\u003ePump Style: 2-Ball (15:1) or Check-Mate Priming Piston\u003c\/li\u003e\n\u003cli\u003eCompatible Materials: Pressure-Sensitive Adhesives (PSA), Polyurethane Reactive (PUR), Polyamide, Ethylene Vinyl Acetate (EVA), Polyisobutylene (PIB), Butyl Rubber, Epoxies, Prepreg Resin Mixes, Warm Melt Sealer, and much more...\u003c\/li\u003e\n\u003cli\u003eContainer Compatibility: 5-Gallon (20L) Pails\u003c\/li\u003e\n\u003cli\u003eMaximum Melt Rate: 1.5 lb\/min (0.7 kg\/min)\u003c\/li\u003e\n\u003cli\u003eMaximum Flow Rate: 12 lb\/min (5.4 kg\/min)\u003c\/li\u003e\n\u003cli\u003eViscosity Compatibility: Low to Ultra High\u003c\/li\u003e\n\u003cli\u003eEffective Area: 0.884 in²\u003c\/li\u003e\n\u003cli\u003eMaximum Fluid Working Pressure: 1,800 psi (125 bar)\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Temperature: 400°F (204°C)\u003c\/li\u003e\n\u003cli\u003ePump Cycles per 1 Gallon: 61\u003c\/li\u003e\n\u003cli\u003eVolume per Cycle: 3.8 in³\u003c\/li\u003e\n\u003cli\u003ePower Input: 220\/240V, 380\/400V, 470\/490V, 575V\u003c\/li\u003e\n\u003cli\u003ePeak Power Consumption: 25 - 30.2 KVA (varies by configuration)\u003c\/li\u003e\n\u003cli\u003eWeight: 840 lbs (381 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWindow \u0026amp; door lamination\u003c\/li\u003e\n\u003cli\u003eAutomotive interiors \u0026amp; RV assembly\u003c\/li\u003e\n\u003cli\u003eElectronics \u0026amp; solar panel manufacturing\u003c\/li\u003e\n\u003cli\u003eTape, label, \u0026amp; bookbinding\u003c\/li\u003e\n\u003cli\u003eInsulating glass production\u003c\/li\u003e\n\u003cli\u003eFurniture, cabinet, \u0026amp; composite bonding\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Graco","offers":[{"title":"Default Title","offer_id":46709587706073,"sku":"GRACO TOF20","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/graco-therm-o-flow-20-hot-melt-system.jpg?v=1750179210"},{"product_id":"bostik-pes-3110-copolyester-hot-melt","title":"Bostik PES 3110 High Viscosity Technical \u0026 Apparel Lamination Copolyester Hot Melt","description":"\u003ch2\u003eBostik PES 3110 Copolyester Adhesive for Apparel \u0026amp; Technical Fabric Lamination\u003c\/h2\u003e\n\u003cp\u003eBostik PES 3110 is a high-viscosity thermoplastic polyester adhesive with very good laundry resistance, making it particularly suitable for technical textile laminations, fabric bonding, and clothing applications. It forms strong bonds to substrates like fiberboard, metal, PVC, and synthetic fabrics, and maintains performance through washing, dry cleaning, and steam exposure. Available in powder and pellet formats, PES 3110 is ideal for durable textile laminations requiring consistent fusing behavior and long-term garment performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance Benefits of Bostik PES 3110 Polyester Glue\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Viscosity for Fabric Lamination:\u003c\/strong\u003e Offers excellent film build and bonding strength for technical textiles and multilayer clothing materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Laundry Resistance:\u003c\/strong\u003e Maintains adhesion through repeated washing and dry cleaning cycles for durable garment use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteam Stability in Apparel Processing:\u003c\/strong\u003e Withstands steam exposure during forming, finishing, or pressing steps in clothing production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Substrate Compatibility:\u003c\/strong\u003e Bonds reliably to fiberboard, metal, PVC, and synthetic fabrics used in apparel and technical textiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent Fusing Behavior:\u003c\/strong\u003e Activates cleanly between 266–320°F (130–160°C), ideal for precise lamination control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in Multiple Forms:\u003c\/strong\u003e Supplied in both powder and pellet formats to suit various textile coating and dot application systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePES 3110 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 3110\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: White Powder or Granules\u003c\/li\u003e\n\u003cli\u003eCompatible Substrates: Fiberboard, metal, PVC, synthetic fabrics\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Technical textile lamination, clothing and apparel bonding\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 259–277°F (126–136°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate: 12 g\/10 min \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e, 40 g\/10 min \u003cspan\u003e@ 374°F (190°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eViscosity: 1,000,000 cps \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003eHardness: Shore D71\u003c\/li\u003e\n\u003cli\u003eDensity: 1.29 g\/cm³\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 266–320°F (130–160°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 4–10 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eWashing Resistance: Up to 167°F (75°C)\u003c\/li\u003e\n\u003cli\u003eDry Cleaning Resistance: Good\u003c\/li\u003e\n\u003cli\u003eSteam Resistance: Very Good\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in a dry environment below 86°F (30°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in original sealed packaging\u003c\/li\u003e\n\u003cli\u003eAvailable Particle Sizes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePowder Dot: 80–200 µm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Pellets \/ 44 lb Bag","offer_id":46818959360217,"sku":"BOSTIK PES 3110 PEL","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Powder \/ 44 lb Bag","offer_id":46833886822617,"sku":"BOSTIK PES 3110 POW","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-3110-copolyester-hot-melt-pellets.jpg?v=1753202161"},{"product_id":"bostik-pes-3320-copolyester-hot-melt","title":"Bostik PES 3320 Low Temp Technical Lamination Copolyester Hot Melt","description":"\u003ch2\u003eBostik PES 3320 Copolyester Hot Melt Glue for Low-Temperature Technical Laminations\u003c\/h2\u003e\n\u003cp\u003eBostik PES 3320 is a moderately low melting thermoplastic polyester adhesive designed for technical fabric laminations and composite bonding. It forms strong bonds to a wide variety of substrates including textiles, fiberboard, metal, PVC, and PU foam. Supplied in both powder and pellet form, PES 3320 is well-suited for applications requiring flexible adhesion at lower processing temperatures.\u003c\/p\u003e\n\u003ch3\u003eBenefits of Bostik PES 3320 Technical Lamination Glue\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Temperature Fusing:\u003c\/strong\u003e Activates at glue-line temperatures between 239–284°F (115–140°C), ideal for heat-sensitive laminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood Adhesion to Multiple Substrates:\u003c\/strong\u003e Bonds well to PU foam, PVC, glass fiber, fiberboard, and metal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModerate Flow Behavior:\u003c\/strong\u003e Melt viscosity of 500,000 cps allows controlled coating and spreading during lamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mechanical Properties:\u003c\/strong\u003e Shore D56 hardness supports use in composite and technical fabric systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable in Versatile Formats:\u003c\/strong\u003e Offered in powder and pellet forms, with particle sizes for paste dot, powder dot, or scatter coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 3320\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: White Powder or Pellets\u003c\/li\u003e\n\u003cli\u003eCompatible Substrates: Textiles, fiberboard, metal, PVC, PU foam\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Technical laminations, composite bonding\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 207–225°F (97–107°C)\u003c\/li\u003e\n\u003cli\u003eGlass Transition Temperature (Tg): 63°F (17°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate: 25 g\/10 min @ 320°F (160°C)\u003c\/li\u003e\n\u003cli\u003eMelt Viscosity: 500,000 cps @ 320°F (160°C)\u003c\/li\u003e\n\u003cli\u003eHardness: Shore D56\u003c\/li\u003e\n\u003cli\u003eDensity: 1.29 g\/cm³\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 239–284°F (115–140°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 3–5 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eWashing Resistance: Up to 122°F (50°C)\u003c\/li\u003e\n\u003cli\u003eHeat Resistance: Up to 158°F (70°C)\u003c\/li\u003e\n\u003cli\u003eDry Cleaning Resistance: Fair\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in a dry environment below 86°F (30°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in original sealed packaging\u003c\/li\u003e\n\u003cli\u003eAvailable Particle Sizes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePaste Dot: 0–80 µm\u003c\/li\u003e\n\u003cli\u003ePowder Dot: 80–200 µm\u003c\/li\u003e\n\u003cli\u003eScatter Coating: 100–500 µm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Pellets \/ 44 lb Bag","offer_id":46818959392985,"sku":"BOSTIK PES 3320 PEL","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Powder \/ 44 lb Bag","offer_id":46833892131033,"sku":"BOSTIK PES 3320 POW","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-3320-copolyester-hot-melt-pellets.jpg?v=1753202401"},{"product_id":"bostik-pes-374-copolyester-hot-melt","title":"Bostik PES 374 General Purpose Technical Lamination Copolyester Hot Melt","description":"\u003ch2\u003eBostik PES 374 Copolyester Glue for Multi-Substrate Technical Laminations\u003c\/h2\u003e\n\u003cp\u003eBostik PES 374 is a thermoplastic polyester adhesive available in powder and pellet form. It bonds well to a wide variety of substrates, including foams, metals, PVC, fiberboards, and microfibers, making it ideal for technical lamination, textile bonding, and clothing applications. PES 374 offers strong wash and dry cleaning resistance and is especially suitable for apparel, garment, and uniform laminations requiring durability and substrate versatility.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits of Bostik PES 374 Technical Lamination Glue\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Substrate Bonding:\u003c\/strong\u003e Adheres reliably to foams, metals, PVC, fiberboards, and microfibers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood Washing and Dry Cleaning Resistance:\u003c\/strong\u003e Maintains strong bonds after laundering and solvent cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible for Apparel and Technical Use:\u003c\/strong\u003e Ideal for clothing, garments, textile printing, and structured technical laminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Flow Properties:\u003c\/strong\u003e Melt flow rate of 30–80 g\/10 min supports clean film formation and coating control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Format Availability:\u003c\/strong\u003e Offered in both powder and pellet form to suit a range of lamination systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 374\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: White Powder or Pellets\u003c\/li\u003e\n\u003cli\u003eCompatible Substrates: Foams, metals, PVC, fiberboard, microfibers\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Technical laminations, textile printing, apparel bonding, clothing, garments\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 243–261°F (117–127°C)\u003c\/li\u003e\n\u003cli\u003eMelting Range (Kofler): Onset: 221°F (105°C), Offset: 266°F (130°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate (2.16 kg): 30 g\/10 min \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e, 80 g\/10 min \u003cspan\u003e@ 374°F (190°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eViscosity: 410,000 cps \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eHardness: Shore D66\u003c\/li\u003e\n\u003cli\u003eDensity: 1.29 g\/cm³\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 248–302°F (120–150°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 3–5 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eWashing Resistance: Up to 167°F (75°C)\u003c\/li\u003e\n\u003cli\u003eHeat Resistance: Up to 194°F (90°C)\u003c\/li\u003e\n\u003cli\u003eDry Cleaning Resistance: Good\u003c\/li\u003e\n\u003cli\u003eSteam Resistance: Good\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in a dry environment below 86°F (30°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in original sealed packaging\u003c\/li\u003e\n\u003cli\u003eAvailable Particle Sizes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePaste Dot: 0–80 µm\u003c\/li\u003e\n\u003cli\u003ePowder Dot: 80–200 µm\u003c\/li\u003e\n\u003cli\u003eScatter Coating: 100–500 µm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Pellets \/ 44 lb Bag","offer_id":46818959425753,"sku":"BOSTIK PES 374 PEL","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Powder \/ 44 lb Bag","offer_id":46833896947929,"sku":"BOSTIK PES 374 POW","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-374-copolyester-hot-melt-pellets.jpg?v=1753202698"},{"product_id":"bostik-pes-376-copolyester-hot-melt","title":"Bostik PES 376 Low Temp Technical Lamination Copolyester Hot Melt","description":"\u003ch2\u003eBostik PES 376 Copolyester Glue for Low-Fusing Temperature Fabric Laminations\u003c\/h2\u003e\n\u003cp\u003eBostik PES 376 is a low-fusing thermoplastic polyester adhesive engineered for textile lamination, technical fabrics, and apparel construction. Its reduced fusing temperature supports bonding to heat-sensitive substrates while enabling fast production cycles. PES 376 delivers good adhesion to foams, metals, PVC, fiberboard, and microfiber materials, and maintains strong bond integrity through washing, dry cleaning, and steam exposure. Available in powder and pellet formats, it's well-suited for dot coating, scatter coating, and other lamination techniques used in clothing and garment manufacturing.\u003c\/p\u003e\n\u003ch3\u003eBostik PES 376 Low Temp Lamination Glue Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Fusing Temperature:\u003c\/strong\u003e Activates at glue-line temperatures between 266–302°F (130–150°C), enabling bonding to heat-sensitive materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Substrate Compatibility:\u003c\/strong\u003e Bonds to foams, metals, PVC, fiberboards, and microfibers used in apparel, clothing, and technical laminate systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood Washing and Dry Cleaning Resistance:\u003c\/strong\u003e Maintains adhesion through laundering at 140°F (60°C) and standard dry cleaning cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteam-Formable:\u003c\/strong\u003e Withstands steam exposure during garment shaping and textile finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Formats Available:\u003c\/strong\u003e Supplied in both powder and pellet form, with particle sizes for paste dot, powder dot, and scatter coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePES 376 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 376\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: White Powder or Pellets\u003c\/li\u003e\n\u003cli\u003eCompatible Substrates: Foams, metals, PVC, fiberboard, microfibers\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Technical laminations, textile bonding, apparel laminations, clothing construction\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 226–244°F (108–118°C)\u003c\/li\u003e\n\u003cli\u003eMelting Range (Kofler): Onset: 221°F (105°C), Offset: 266°F (130°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate (2.16 kg): 18 g\/10 min \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e, 60 g\/10 min \u003cspan\u003e@ 374°F (190°C)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eViscosity: 600,000 cps \u003cspan\u003e@ 320°F (160°C)\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003eHardness: Shore D70\u003c\/li\u003e\n\u003cli\u003eDensity: 1.29 g\/cm³\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 266–302°F (130–150°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 3–5 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eWashing Resistance: Up to 140°F (60°C)\u003c\/li\u003e\n\u003cli\u003eHeat Resistance: Up to 176°F (80°C)\u003c\/li\u003e\n\u003cli\u003eDry Cleaning Resistance: Good\u003c\/li\u003e\n\u003cli\u003eSteam Resistance: Good\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in a dry environment below 86°F (30°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in original sealed packaging\u003c\/li\u003e\n\u003cli\u003eAvailable Particle Sizes:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePaste Dot: 0–80 µm\u003c\/li\u003e\n\u003cli\u003ePowder Dot: 80–200 µm\u003c\/li\u003e\n\u003cli\u003eScatter Coating: 100–500 µm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Pellets \/ 44 lb Bag","offer_id":46818959458521,"sku":"BOSTIK PES 376 PEL","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Powder \/ 44 lb Bag","offer_id":46833911169241,"sku":"BOSTIK PES 376 POW","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-376-copolyester-hot-melt-pellets.jpg?v=1753203028"},{"product_id":"bostik-pes-594v-copolyester-hot-melt","title":"Bostik PES 594V Ultra Flow Copolyester Hot Melt for PBT Bonding","description":"\u003ch2\u003eBostik PES 594V Copolyester Glue for Flexible Coating and PBT Lamination\u003c\/h2\u003e\n\u003cp\u003eBostik PES 594V is a high-performance thermoplastic polyester adhesive designed for flexible coatings and challenging bonding applications. With an ultra-high melt flow rate and low viscosity, PES 594V delivers fast, uniform coverage in high-speed production systems. Its compatibility with PBT (polybutylene terephthalate) makes it ideal for use in advanced textiles, technical films, and engineered composites. Supplied in pellet form, PES 594V supports efficient lamination and coating performance under demanding thermal conditions.\u003c\/p\u003e\n\u003ch3\u003eBenefits of Bostik PES 594V Ultra Flow Polyester Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra High Flow Performance:\u003c\/strong\u003e Melt flow rate of 420 g\/10 min at 374°F (190°C) supports fast, uniform coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Viscosity:\u003c\/strong\u003e Melt viscosity of just 25,000 cps ensures smooth spreading and film formation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePBT Compatibility:\u003c\/strong\u003e Formulated for excellent adhesion to polybutylene terephthalate and other advanced polymers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Coating Design:\u003c\/strong\u003e Ideal for precision bonding and flexible lamination in engineered textiles and composites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePellet Format:\u003c\/strong\u003e Supplied in round pellet form for efficient handling and consistent thermal behavior.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePES 594V Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 594V\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: Pellets\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Flexible coatings, PBT lamination, high-speed film bonding\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 289–307°F (143–153°C)\u003c\/li\u003e\n\u003cli\u003eGlass Transition Temperature (Tg): 54°F (12°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate: 420 g\/10 min @ 374°F (190°C)\u003c\/li\u003e\n\u003cli\u003eMelt Viscosity: 25,000 cps @ 374°F (190°C)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.23 g\/cm³\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 302–320°F (150–160°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 2–4 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in dry conditions below 77°F (25°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in original sealed packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"44 lb Bag","offer_id":46818959556825,"sku":"BOSTIK PES 594V PEL","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-594v-copolyester-hot-melt-pellets.jpg?v=1753203923"},{"product_id":"bostik-pes-680v-copolyester-hot-melt","title":"Bostik PES 680V Soft Touch Flexible Copolyester Hot Melt","description":"\u003ch2\u003eBostik PES 680V Copolyester Glue for Flexible, Soft Touch Film Laminations\u003c\/h2\u003e\n\u003cp\u003eBostik PES 680V is a high-performance elastic polyester adhesive specifically designed for flexible bonding and soft touch film applications. With a low Shore D hardness of 30 and a glass transition temperature of –22°F (–30°C), it enables durable yet flexible adhesion to sensitive substrates. PES 680V’s thermal range of 284–338°F (140–170°C) and smooth processing behavior make it ideal for engineered laminates requiring softness, stretch, and resilience. It also supports soft touch finishes commonly used in premium packaging and technical films.\u003c\/p\u003e\n\u003ch3\u003eFeatures of Bostik PES 680V Soft Touch Polyester Hot Melt Glue\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElastic and Flexible Bonding:\u003c\/strong\u003e Ideal for laminations requiring stretch, softness, and impact resilience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft Touch Compatibility:\u003c\/strong\u003e Supports tactile finishes often used in premium packaging and technical films.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Hardness for Delicate Substrates:\u003c\/strong\u003e Shore D30 rating enables gentle adhesion without compromising flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Temp Processing Window:\u003c\/strong\u003e Fuses between 284–338°F (140–170°C), suitable for sensitive film applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable Melt Properties:\u003c\/strong\u003e Melt flow rate of 20 g\/10 min and viscosity of 600,000 cps @320°F (160°C) ensure controlled coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e680V Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PES 680V\u003c\/li\u003e\n\u003cli\u003eChemistry: Thermoplastic Copolyester Adhesive\u003c\/li\u003e\n\u003cli\u003eAppearance: Pellets\u003c\/li\u003e\n\u003cli\u003eCommon Applications: Soft touch films, flexible lamination, elastic bonding, textile printing\u003c\/li\u003e\n\u003cli\u003eMelting Point (DSC): 230–257°F (110–125°C)\u003c\/li\u003e\n\u003cli\u003eGlass Transition Temperature (Tg): –22°F (–30°C)\u003c\/li\u003e\n\u003cli\u003eMelt Flow Rate: 20 g\/10 min @ 320°F (160°C)\u003c\/li\u003e\n\u003cli\u003eMelt Viscosity: 600,000 cps @ 320°F (160°C)\u003c\/li\u003e\n\u003cli\u003eDensity: 1.16 g\/cm³\u003c\/li\u003e\n\u003cli\u003eHardness: Shore D30\u003c\/li\u003e\n\u003cli\u003eFusing Temperature (Glue-Line Temp): 284–338°F (140–170°C)\u003c\/li\u003e\n\u003cli\u003eFusing Pressure: 2–4 N\/cm²\u003c\/li\u003e\n\u003cli\u003eFusing Time: 10–15 seconds\u003c\/li\u003e\n\u003cli\u003eStorage and Handling: Store in dry conditions below 77°F (25°C)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Up to 2 years in sealed packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"44 lb Bag","offer_id":46818959589593,"sku":"BOSTIK PES 680V PEL","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-pes-680v-copolyester-hot-melt-pellets.jpg?v=1753204204"},{"product_id":"bostik-pe75-copolyester-web-adhesive","title":"Bostik PE75 Low-Temperature Copolyester Hot Melt Web Adhesive","description":"\u003ch2\u003eVersatile Low-Melt Web Adhesive for Textiles, Foams \u0026amp; Vinyl\u003c\/h2\u003e\n\u003cp\u003eBostik PE75 is a nonwoven polyester hot melt web adhesive designed for \u003cstrong\u003elamination and assembly applications\u003c\/strong\u003e involving \u003cstrong\u003etemperature-sensitive materials.\u003c\/strong\u003e Its fine-filament web construction provides uniform adhesive coverage while maintaining good textile hand and a permeable bond. PE75 bonds to a wide variety of \u003cstrong\u003efabrics, urethane foams and vinyls\u003c\/strong\u003e and resists repeated home laundering, oils and plasticizers.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits of Bostik PE75 Heat-Activated Web Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Temperature Activation:\u003c\/strong\u003e Activates at just 190°F (88°C) for bonding temperature-sensitive substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Adhesion:\u003c\/strong\u003e Bonds well to fabrics, urethane foams and vinyls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash Resistant:\u003c\/strong\u003e Resists repeated home laundering for long-lasting textile and fabric bonds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniform, Permeable Coverage:\u003c\/strong\u003e Fine-filament construction provides uniform coverage while maintaining good textile hand and bond porosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil \u0026amp; Plasticizer Resistant:\u003c\/strong\u003e Provides good resistance to oils and plasticizers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Solids:\u003c\/strong\u003e Nonwoven web format provides controlled adhesive application for intermittent or continuous processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PE75\u003c\/li\u003e\n\u003cli\u003eChemistry: Copolyester\u003c\/li\u003e\n\u003cli\u003eForm: Nonwoven Web\u003c\/li\u003e\n\u003cli\u003eMelting Range: 167–185°F (75–85°C)\u003c\/li\u003e\n\u003cli\u003eMinimum Activation Temperature: 190°F (88°C)\u003c\/li\u003e\n\u003cli\u003eFluidity: High\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky White Nonwoven Fabric\u003c\/li\u003e\n\u003cli\u003eTypical Roll Length: 500–1,000 linear yd (457–914 linear m)\u003c\/li\u003e\n\u003cli\u003eCore Size: 3 in (7.6 cm) ID\u003c\/li\u003e\n\u003cli\u003eBasis Weight Range: 15–100 g\/yd² (18–120 g\/m²)\u003c\/li\u003e\n\u003cli\u003eTrimmed Width: 10–68 in (25–173 cm)\u003c\/li\u003e\n\u003cli\u003eShelf Life: 24 Months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\" title=\"Contact us for more information on Bostik web adhesive rolls\" rel=\"noopener\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for customized widths and basis weights.\u003c\/p\u003e\n\u003ch3\u003eHow to Activate \u0026amp; Apply Bostik PE75 Adhesive Webbing\u003c\/h3\u003e\n\u003cp\u003eBostik PE75 adhesive web can be heat activated using an electric fusing press, heated rolls, heated air, radiant heat or steam press. For dry heat applications, PE75 requires a minimum activation temperature of 190°F (88°C). Typical reactivation time is less than 15 seconds, although actual processing time will vary depending on the application technique, temperature, pressure, substrates and adhesive thickness.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApparel \u0026amp; Textile Bonding\u003c\/li\u003e\n\u003cli\u003eFootwear\u003c\/li\u003e\n\u003cli\u003eFurniture\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":49085514711257,"sku":"BOSTIK PE75","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-hot-melt-web-adhesive.jpg?v=1786722950"},{"product_id":"bostik-pe85-copolyester-web-adhesive","title":"Bostik PE85 Wash-Resistant Copolyester Hot Melt Web Adhesive","description":"\u003ch2\u003eLow-Melt Textile Bonding Adhesive for Fabrics, Foams \u0026amp; Vinyl\u003c\/h2\u003e\n\u003cp\u003eBostik PE85 is a nonwoven polyester hot melt web adhesive designed for \u003cstrong\u003etextile lamination and assembly applications requiring lower processing temperatures and durable bonds\u003c\/strong\u003e. Its fine-filament construction provides uniform adhesive coverage, good textile hand and a permeable bond across a wide variety of \u003cstrong\u003efabrics, foams and vinyls\u003c\/strong\u003e. With excellent washing resistance and good resistance to oils and plasticizers, PE85 is well suited for \u003cstrong\u003eapparel, footwear and furniture applications\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003ePerformance Features of Bostik PE85 Textile Web Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Wash Resistance:\u003c\/strong\u003e Resists repeated home laundering and is rated excellent for washing resistance within Bostik's polyester web adhesive range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Melt Processing:\u003c\/strong\u003e A 199°F (93°C) minimum activation temperature makes PE85 suitable for bonding temperature-sensitive substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Adhesion:\u003c\/strong\u003e Provides excellent adhesion to textiles, vinyl and urethane foams.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermeable Bond Construction:\u003c\/strong\u003e Provides a good strength-to-porosity ratio for applications where bond permeability is important.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil \u0026amp; Plasticizer Resistance:\u003c\/strong\u003e Provides good resistance to oils and plasticizers for durable bonded constructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Solids Web:\u003c\/strong\u003e Fabric-like web construction supports intermittent and continuous processing while providing uniform adhesive coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PE85\u003c\/li\u003e\n\u003cli\u003eChemistry: Copolyester\u003c\/li\u003e\n\u003cli\u003eForm: Nonwoven Web\u003c\/li\u003e\n\u003cli\u003eMelting Range: 185–203°F (85–95°C)\u003c\/li\u003e\n\u003cli\u003eMinimum Activation Temperature: 199°F (93°C)\u003c\/li\u003e\n\u003cli\u003eFluidity: High\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky White\u003c\/li\u003e\n\u003cli\u003eTypical Roll Length: 500–1,000 linear yd (457–914 linear m)\u003c\/li\u003e\n\u003cli\u003eCore Size: 3 in (7.6 cm) ID\u003c\/li\u003e\n\u003cli\u003eBasis Weight Range: 15–100 g\/yd² (18–120 g\/m²)\u003c\/li\u003e\n\u003cli\u003eTrimmed Width: 10–68 in (25–173 cm)\u003c\/li\u003e\n\u003cli\u003eShelf Life: 24 Months when shipped and stored below 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\" title=\"Contact us for more information on Bostik web adhesive rolls\" rel=\"noopener\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for customized widths and basis weights.\u003c\/p\u003e\n\u003ch3\u003eHow to Activate \u0026amp; Apply Bostik PE85 Adhesive Webbing\u003c\/h3\u003e\n\u003cp\u003eBostik PE85 adhesive web can be activated using an electric fusing press, heated rolls, heated air, radiant heat or steam press. Dry heat activation requires a minimum temperature of 199°F (93°C). Reactivation time is typically 8–10 seconds, although actual processing time depends on the activation technique, temperature, pressure, substrates and adhesive thickness.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApparel \u0026amp; Textile Bonding\u003c\/li\u003e\n\u003cli\u003eFootwear\u003c\/li\u003e\n\u003cli\u003eFurniture\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":49085520478425,"sku":"BOSTIK PE85","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-hot-melt-web-adhesive.jpg?v=1786722950"},{"product_id":"bostik-pe120-copolyester-web-adhesive","title":"Bostik PE120 Temperature-Resistant Copolyester Hot Melt Web Adhesive","description":"\u003ch2\u003eDurable Web Adhesive for Automotive, Filter Media \u0026amp; Fabric Lamination\u003c\/h2\u003e\n\u003cp\u003eBostik PE120 is a nonwoven polyester hot melt web adhesive designed for \u003cstrong\u003elamination and assembly applications requiring good temperature resistance\u003c\/strong\u003e and excellent washing resistance. Its fine-filament construction provides uniform adhesive coverage and good textile hand while bonding to a wide variety of \u003cstrong\u003efabrics, foams and vinyls\u003c\/strong\u003e. PE120 is fast setting and non-yellowing, with \u003cstrong\u003egood resistance to oils and plasticizers\u003c\/strong\u003e for durable bonded constructions.\u003c\/p\u003e\n\u003ch3\u003ePerformance Features of Bostik PE120 Polyester Web Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resistant:\u003c\/strong\u003e Provides good temperature resistance for demanding lamination and assembly applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Wash Resistance:\u003c\/strong\u003e Resists repeated home laundering and provides excellent resistance to laundering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong Textile \u0026amp; Foam Adhesion:\u003c\/strong\u003e Provides excellent adhesion to textiles and urethane foam while bonding to a wide variety of fabrics, foams and vinyls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Setting:\u003c\/strong\u003e Fast-setting characteristics support efficient lamination and assembly processes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Yellowing:\u003c\/strong\u003e Non-yellowing performance makes PE120 suitable for bonded constructions where adhesive appearance is important.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil \u0026amp; Plasticizer Resistant:\u003c\/strong\u003e Provides good resistance to oils and plasticizers for durable bonded assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PE120\u003c\/li\u003e\n\u003cli\u003eChemistry: Copolyester\u003c\/li\u003e\n\u003cli\u003eForm: Nonwoven Web\u003c\/li\u003e\n\u003cli\u003eMelting Range: 239–257°F (115–125°C)\u003c\/li\u003e\n\u003cli\u003eMinimum Activation Temperature: 270°F (132°C)\u003c\/li\u003e\n\u003cli\u003eFluidity: High\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky White\u003c\/li\u003e\n\u003cli\u003eTypical Roll Length: 500–1,000 linear yd (457–914 linear m)\u003c\/li\u003e\n\u003cli\u003eCore Size: 3 in (7.6 cm) ID\u003c\/li\u003e\n\u003cli\u003eBasis Weight Range: 15–100 g\/yd² (18–120 g\/m²)\u003c\/li\u003e\n\u003cli\u003eTrimmed Width: 10–68 in (25–173 cm)\u003c\/li\u003e\n\u003cli\u003eShelf Life: 24 Months when shipped and stored below 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\" title=\"Contact us for more information on Bostik web adhesive rolls\" rel=\"noopener\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for customized widths and basis weights.\u003c\/p\u003e\n\u003ch3\u003eHow to Activate \u0026amp; Apply Bostik PE120 Adhesive Webbing\u003c\/h3\u003e\n\u003cp\u003eBostik PE120 adhesive web can be activated using an electric fusing press, heated rolls, heated air or radiant heat. Dry heat activation requires a minimum temperature of 270°F (132°C). Reactivation time is typically 8–10 seconds, although actual processing time depends on the activation technique, temperature, pressure, substrates and adhesive thickness.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDecorative Fabric Constructions\u003c\/li\u003e\n\u003cli\u003eIndustrial Filter Media\u003c\/li\u003e\n\u003cli\u003eAutomotive Upholstery\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":49085523001561,"sku":"BOSTIK PE120","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-hot-melt-web-adhesive.jpg?v=1786722950"},{"product_id":"bostik-pe165-copolyester-web-adhesive","title":"Bostik PE165 High-Temperature Copolyester Hot Melt Web Adhesive","description":"\u003ch2\u003eHigh-Heat Web Adhesive for Industrial \u0026amp; Engineering Laminates\u003c\/h2\u003e\n\u003cp\u003eBostik PE165 is a nonwoven polyester hot melt web adhesive designed for \u003cstrong\u003elamination and assembly applications requiring high-temperature performance\u003c\/strong\u003e. Its fine-filament construction provides uniform adhesive coverage and good textile hand while bonding well to a wide variety of \u003cstrong\u003efabrics, urethane foams and vinyls\u003c\/strong\u003e. PE165 resists \u003cstrong\u003erepeated home laundering, oils and plasticizer migration\u003c\/strong\u003e, making it well suited for demanding industrial bonded constructions.\u003c\/p\u003e\n\u003ch3\u003eKey Features of Bostik PE165 Heat-Activated Web Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature Resistance:\u003c\/strong\u003e Provides high-temperature performance for demanding lamination and assembly applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Adhesion:\u003c\/strong\u003e Provides excellent adhesion to textiles, vinyls and urethane foams.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlasticizer Migration Resistance:\u003c\/strong\u003e Provides excellent resistance to plasticizer migration for bonded constructions involving plasticized materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash Resistant:\u003c\/strong\u003e Resists repeated home laundering for durable bonded constructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil Resistant:\u003c\/strong\u003e Provides resistance to oils for durable bonded applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniform Web Coverage:\u003c\/strong\u003e Fine-filament nonwoven construction provides uniform adhesive coverage and good textile hand while supporting intermittent and continuous processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PE165\u003c\/li\u003e\n\u003cli\u003eChemistry: Copolyester\u003c\/li\u003e\n\u003cli\u003eForm: Nonwoven Web\u003c\/li\u003e\n\u003cli\u003eMelting Range: 320–338°F (160–170°C)\u003c\/li\u003e\n\u003cli\u003eMinimum Activation Temperature: 347°F (175°C)\u003c\/li\u003e\n\u003cli\u003eFluidity: Medium\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky White\u003c\/li\u003e\n\u003cli\u003eTypical Roll Length: 500–1,000 linear yd (457–914 linear m)\u003c\/li\u003e\n\u003cli\u003eCore Size: 3 in (7.6 cm) ID\u003c\/li\u003e\n\u003cli\u003eBasis Weight Range: 15–100 g\/yd² (18–120 g\/m²)\u003c\/li\u003e\n\u003cli\u003eTrimmed Width: 10–68 in (25–172 cm)\u003c\/li\u003e\n\u003cli\u003eShelf Life: Approximately 24 Months when shipped and stored below 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\" title=\"Contact us for more information on Bostik web adhesive rolls\" rel=\"noopener\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for customized widths and basis weights.\u003c\/p\u003e\n\u003ch3\u003eHow to Activate \u0026amp; Apply Bostik PE165 Adhesive Webbing\u003c\/h3\u003e\n\u003cp\u003eBostik PE165 adhesive web can be activated using an electric fusing press, heated rolls, heated air or radiant heat. Heat activation requires a glue-line temperature of 347–392°F (175–200°C). Reactivation time is typically 8–10 seconds, although actual processing time depends on the activation technique, temperature, pressure, substrates and adhesive thickness.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial Filter Media\u003c\/li\u003e\n\u003cli\u003eEngineering Laminates\u003c\/li\u003e\n\u003cli\u003eThermal Barriers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":49085524508889,"sku":"BOSTIK PE165","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-hot-melt-web-adhesive.jpg?v=1786722950"},{"product_id":"bostik-pe103-copolyester-web-adhesive","title":"Bostik PE103 General-Purpose Copolyester Hot Melt Web Adhesive","description":"\u003ch2\u003eGeneral-Purpose Web Adhesive for Automotive, Apparel \u0026amp; Footwear\u003c\/h2\u003e\n\u003cp\u003eBostik PE103 is a \u003cstrong\u003egeneral-purpose polyester hot melt web adhesive\u003c\/strong\u003e for automotive interiors, apparel and footwear lamination applications. It bonds to a wide variety of \u003cstrong\u003efabrics, foams and vinyls\u003c\/strong\u003e while its fine-filament construction provides uniform adhesive coverage, good textile hand and a permeable bond. PE103 also offers excellent wash resistance and good resistance to oils and plasticizers for \u003cstrong\u003edurable bonded assemblies\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eKey Features of Bostik PE103 Lamination Web Adhesive\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral-Purpose Performance:\u003c\/strong\u003e Medium-melting copolyester chemistry provides a versatile solution for lamination and assembly applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent Textile \u0026amp; Foam Adhesion:\u003c\/strong\u003e Provides excellent adhesion to textiles and urethane foam, with versatile bonding performance across fabrics, foams and vinyls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWash Resistant:\u003c\/strong\u003e Resists repeated home laundering and is rated excellent for wash resistance in Bostik's web adhesive selector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniform, Permeable Coverage:\u003c\/strong\u003e Fine-filament construction provides uniform adhesive application with a good strength-to-porosity ratio for a permeable bond.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil \u0026amp; Plasticizer Resistant:\u003c\/strong\u003e Provides good resistance to oils and plasticizers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Solids:\u003c\/strong\u003e Nonwoven web format simplifies adhesive application and is suitable for both intermittent and continuous processes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PE103\u003c\/li\u003e\n\u003cli\u003eChemistry: Copolyester\u003c\/li\u003e\n\u003cli\u003eForm: Nonwoven Web\u003c\/li\u003e\n\u003cli\u003eMelting Range: 212–230°F (100–110°C)\u003c\/li\u003e\n\u003cli\u003eMinimum Activation Temperature: 221°F (105°C)\u003c\/li\u003e\n\u003cli\u003eFluidity: High\u003c\/li\u003e\n\u003cli\u003eAppearance: Milky White\u003c\/li\u003e\n\u003cli\u003eTypical Roll Length: 500–1,000 linear yd (457–914 linear m)\u003c\/li\u003e\n\u003cli\u003eCore Size: 3 in (7.6 cm) ID\u003c\/li\u003e\n\u003cli\u003eBasis Weight Range: 15–100 g\/yd² (18–120 g\/m²)\u003c\/li\u003e\n\u003cli\u003eTrimmed Width: 10–68 in (25–173 cm)\u003c\/li\u003e\n\u003cli\u003eShelf Life: 24 Months when shipped and stored below 130°F (54°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e \u003ca href=\"\/pages\/contact-us\" title=\"Contact us for more information on Bostik web adhesive rolls\" rel=\"noopener\" target=\"_blank\"\u003eContact us\u003c\/a\u003e for customized widths and basis weights.\u003c\/p\u003e\n\u003ch3\u003eHow to Activate \u0026amp; Apply Bostik PE103 Adhesive Webbing\u003c\/h3\u003e\n\u003cp\u003eBostik PE103 adhesive web can be activated using an electric fusing press, heated rolls, heated air, radiant heat or steam press. Dry heat activation requires a minimum temperature of 221°F (105°C). Reactivation time is typically 8–10 seconds, although actual processing time depends on the activation technique, temperature, pressure, substrates and adhesive thickness.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive Interiors\u003c\/li\u003e\n\u003cli\u003eApparel\u003c\/li\u003e\n\u003cli\u003eFootwear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bostik","offers":[{"title":"Default Title","offer_id":49085534666969,"sku":"BOSTIK PE103","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1600\/8847\/files\/bostik-hot-melt-web-adhesive.jpg?v=1786722950"}],"url":"https:\/\/www.hotmelt.com\/collections\/application-laminating.oembed?page=2","provider":"Hotmelt.com","version":"1.0","type":"link"}